product Image
OEM products
Model Name
-
Series
Medical Products
Data
-
Manufacturer information
provider logo
KTMED

Biometric signal measuring machine manufacturer, Patient monitor, Blood pressure measuring instrument, OEM products, SpO2 sensor and more

Problem with product info?
Update request
Manufacturer
KTMED
Brand
-
SKU
47936
Product Name
OEM products
Model Name
-
Size
-
Weight
-
Product Details

KTMED OEM products

 

 KSM-04
 SpO2 Module 

ㆍ Measuring range : 100% ~ 35%
ㆍ Pulse rate range : 0 ~ 254 bpm
ㆍ Accuracy : SpO2 : 100% ~ 90% : ±1%
                               89% ~ 70% : ±2%
                               79% ~ 65% : ±3%
ㆍ below 65%: not specified
ㆍ Pulse : 30 ~ 255bpm ±1bpm
ㆍ SpO2 value & pulse value averaging : 8 pulse beats 



KTMED OEM products  1

 KNM-05
 NIBP Module 

ㆍ Dimension : applied front page
                     68×128×32mm(Width ×Length ×Height)
ㆍ Weight : approximately 180g
ㆍ Supply Power Voltage : DC 7Volt ±10%, 500mA
ㆍ Consumption Power : 3.2 Watt at Operating Motor
                                   0.35 Watt at Standby
ㆍ Measuring Range : 50 ∼ 280mmHg Systolic, Diastolic and Mean
                               30 ∼ 300bpm Pulse Rate
ㆍ Measuring Mode : Adult/Neonate
                               Manual/Automatic
ㆍ Protection : Double Overpressure Protection(Meet IEC Regulation)
                    Overpressure 300mmHg + 20mmHg at Adult Mode
                    150mmHg + 15mmHg at Neonate Mode
                    Hardware Protection - Use of 2 Pressure Sensor
                    Use of 2 Solenoid Valve
                    Source·Sink Driver
                    Software Protection
                        - Detect Measuring Over Time
                        - Detect Malfunction of Controller
ㆍ Manometer Mode : 0 ∼ 300mmHg ±3mmHg
ㆍ Operating Temperature : 0 to +50 ℃
ㆍ Operating Humidity : 10% ∼ 95% (noncondensing)
ㆍ Storage Temperature : -20℃ to 60 ℃
ㆍ Measuring Method : Oscilometric 

 
 

 KBC-B04
 ECG Module 

  ECG
 ㆍCMRR (Common Mode Rejection Ratio) : ≥60dB 
 ㆍ Input Impedance ≥10MΩ
 ㆍ ECG Channel 1 or 2
 ㆍ Electrodes 3 wires : RA, LA, LL
                                5 wires : RA, LA, LL, RL, V1(Chest)
 ㆍ Leads Select 3 Leads : I, II, III
                                    7 Leads : I, II, III, aVR, aVL, aVF, V1
 ㆍ Frequency Bandwidth 0.5~40Hz(at Filter )
 ㆍ Gain Selection 0.5, 1, 2, 4 mV/cm 
 ㆍ Heart Rate Pulse Range 30~300 bpm
 ㆍ QRS Indication Available 
 ㆍ Heart Rate Accuracy ±1bpm or 2%
 ㆍ Isolation Breakdown Voltage >4000V AC 60 Sec 60Hz 
 ㆍ Patient Leakage Current ≤100uA
 ㆍ Notch Filter 50/60 Hz 
 ㆍ Defibrillator / ESIS Protected 

 Respiration 
 ㆍ Excitation Current < 500uA 
 ㆍ Excitation Frequency 50kHz 
 ㆍ Measuring Method Thoracic Impedance Detection between RA and LA of ECG Electrode
 ㆍ Measuring Range 2~99 bpm
 ㆍ Accuracy ±1bpm or 2%
 ㆍ Sensitivity 0.2~4Ω/cm

Temperature
 ㆍ Measuring Range 15.0~45.0℃ 
 ㆍ Probe Compatible YSI probe and Exacon
 ㆍ Scale Celsius Degrees 
 ㆍ Accuracy ±0.1℃

 Power
 ㆍ Direct Current Voltage 6.5~8.0V
 ㆍ Consumption Current Maximum 190mA at 7.5V

 ㆍ Dimension 120ⅹ68ⅹ16mm(WⅹDⅹH)
 



Biometric signal measuring machine manufacturer, Patient monitor, Blood pressure measuring instrument, OEM products, SpO2 sensor and more
KTMED Inc. is commercializing a breakthrough in non-invasive technology for the measurement of patient parameters, such as SPO2, ETCO2, ECG, NIBP etc. The Company is developing innovative devices for the measurement of reliable pulse oximetry (non-invasive oxygen saturation or “SpO2”) under low perfusion(poor blood flow) and signal interference(patient motion) conditions. The Company was founded in 2000, but the technicians have specialized career in this filed over 20 years. Main target markets for the Company’s products range widely from critical care segments in hospital to a large spectrum of point-of-care testing sites in hospital, physician clinic, extended care, emergency and public health setting. KTMED offers market-leading solutions in the area of patient monitor system.
Inquiry