Apply / A wide variety of application from power plant to commercial building. SEONDO's MCC-S, NS type motor control center is a new type of control center developed for continuous operation with high reliability..
International standards and regulations
- applicable standards are KS,JEM,IEC,NEMA are others.
Compact structure with useful space.
- JEM or NEMA type-C wiring assures more effective and safe wiring and maintenance.
- Any kinds of secondary wiring works are possible with untilzing upper/lower horizontal and vetical cable ducts.
Unit Drawout type
- Maintenance and repar can be done easily and safely wiht unit drawout
(MCC-S : 1'st,2'nd , MCC_NS:1'st,2'nd,3'rd)
Easy wiring and connection
- An ample space is reserved for horizontal and vertical wiring.
- Intimate contact to vertical bus throught stab connector.
Easy to increase then capacity
- As the horizontal and the verical bus bars are standardized by currnet rating and short time withstand current,the system application can be done effectivelly.
- The minimum size is 300mm in height and the size can be increased according to motor capacity.
- An addition or alteration of the units can be done with ease. Also then location of the horizontal bus,and the terminal block compartments can be easily adjusted to fit the requirement.
"MCC_S" Type | "MCC-NS" Type | |
| Rated Voltage | 600V | 600 V |
| Rated Current | Horizontal Bus : 400A - 2500A Vertical bus : 400AA (confer with the company in case of over 3000 A) | Horizontal Bus : 400A - 2500A Vertical bus : 600A (confer with the company in case of over 3000 A) |
| Rated Frequency | 60 or 50Hz | 60 or 50 Hz |
| Rated Short Time Current:1sec) | Max. 50 kA | Max. 50 kA |
| Rated Operating Voltage | AC 110V or 220V (confer with the company in case of other order) | AC 110V or 220V (confer with the company in case of other order) |
| Size | W : 600mm *() Back to Back MSS Size | W : 800mm *() Back to Back MSS Size |
