Plastic composite material manufacturer, Bearing, Bush, Wearing for Hydraulic cylinder, Oilless bearing and more
Specifications
About KAMGLIDE
KAMGLIDE composite bearings(Wear rings) are composite materials with thermosetting resin impregnated with fabric and have excellent strength and durability compared with general thermoplastic materials. The characteristics of KAMGLIDE appear depending on the combination of different resins and fabrics with high strength and high thermal resistance. In addition, glass fibers are used for products that require special strength, and solid lubricants such as PTFE and graphite can be optionally added which is suitable for higher load and speed.
■ Material structure Fine weave cotton fabric-reinforced phenolic composites
■ Type CN10(Standard), CN20(graphite additions)
■ Features Good mechanical strength, dimensional stability, chemical resistance, readily machinable
■ Operating conditions Oil or grease lubricated, low maintenance
■ Availability Tubes, cylinderical bushes, flange bushes, machined parts
■ Typical usage Sliding bearing, bushes, thrust plates
■ Properties
|
|
|
Density [g/cm3] |
Compressive strength [MPa] |
Impact strength [J/m] |
Hardness [HRM] |
Thermal expansion [10-5/℃] |
Swell in water [%] |
Max. Temperature [℃] |
Max. Compression [MPa] |
||||
|
Continuous |
Intermittent |
Radial |
Axial |
||||||||||
|
CN10 |
|
1.31 |
270 |
16 |
105 |
3~4 |
2.0 |
130 |
150 |
54 |
38 |
||
|
CN20 |
|
1.35 |
250 |
13 |
97 |
3~4 |
2.0 |
130 |
150 |
45 |
30 |
||
