매그스위치, 자석제품, 조선용 치공구, 면취기, 푸셔, 매그드릴, 중량물 리프팅 솔루션
NHC-H
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.75 | 0-20 | 24 | 4 | 46 | 254 | 28 | 35 | 58 | 190 | 40 | 17 | 32 | 56 | 5.6 |
| 1 | 0-25 | 30 | 4 | 57 | 290 | 34 | 40 | 64 | 224 | 46 | 18 | 32 | 56 | 7.0 |
| 2 | 0-30 | 35 | 5 | 57 | 295 | 36 | 44 | 74 | 248 | 50 | 18 | 40 | 68 | 9.9 |
| 3 | 0-35 | 40 | 5 | 62 | 306 | 38 | 46 | 90 | 264 | 55 | 20 | 40 | 76 | 13.0 |
| 0-50 | 60 | 5 | 67 | 360 | 42 | 48 | 96 | 290 | 54 | 27 | 50 | 86 | 19.0 | |
| 5 | 0-30 | 40 | 5 | 65 | 365 | 46 | 52 | 94 | 300 | 65 | 28 | 50 | 100 | 24.4 |
| 0-35 | 45 | 5 | 63 | 382 | 45 | 45 | 104 | 306 | 65 | 28 | 50 | 100 | 25.3 | |
| 0-40 | 50 | 5 | 63 | 382 | 45 | 48 | 104 | 306 | 65 | 28 | 50 | 100 | 25.8 | |
| 30-70 | 80 | 5 | 82 | 445 | 62 | 52 | 118 | 340 | 63 | 28 | 50 | 106 | 36.0 | |
| 50-100 | 105 | 5 | 92 | 505 | 52 | 58 | 120 | 380 | 65 | 28 | 60 | 124 | 59.0 | |
| 8 | 0-50 | 60 | 5 | 97 | 490 | 55 | 80 | 122 | 406 | 65 | 33 | 68 | 130 | 53.6 |
| 10 | 0-50 | 65 | 5 | 100 | 575 | 62 | 100 | 132 | 412 | 70 | 35 | 73 | 137 | 65.8 |
| 50-100 | 105 | 5 | 112 | 588 | 55 | 117 | 142 | 444 | 70 | 35 | 72 | 136 | 73 |
| No. | ASS’Y NAME | No. | PART NAME | No. | ASS’Y NAME | No. | PART NAME |
|---|---|---|---|---|---|---|---|
| 1 | BODY | - | - | 6 | JAW ASS’Y | 6-1 | SWIVEL JAW |
| 2 | SHACKLE | - | - | 6-2 | BOLT & NUT | ||
| 3 | SHACKLE PIN | - | - | 7 | LATCH ASS’Y | 7-1 | SAFETY LATCH |
| 4 | CAM ASS’Y | 4-1 | CAM | 7-2 | HANDLE RING | ||
| 4-2 | SPRING PIN | 7-3 | SPRING PIN | ||||
| 5 | CAM PIN ASS’Y | 5-1 | CAM PIN | 7-4 | BOLT & NUT | ||
| 5-2 | SPRING PIN | 8 | LOCK SPRING | - | - |
Features
The NHC-H has the built-in safety latch that prevents a work piece from slipping due to the initial clamping force caused by the spring even if the wire rope becomes loose during the operation.
How to use
- Insert a work piece into the inside end of the clamp's jaw opening and then lock the safety latch.
- Clamp the center of gravity of a work piece in order to equally distribute the weight of the work piece.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Do not vertically lift work pieces with horizontal clamps.
- Never lift narrow work pieces.
- Never lift bendable work pieces.
