Safety pattern type pressure gauge Solid-front and turret style thermoplastic case_P359 series
Service intended
P359 safety pattern pressure gauge comes with 4½" thermoplastic case for corrosive environment and heat resistance. Its solid front and blowout back case are designed to meet the safety requirements.
Nominal diameter |
125 mm (4½") |
Accuracy |
±0.5 % of full scale ±1.0 % of full scale |
Scale range (MPa, kPa, bar) |
-0.1~ 0 to 0 ~ 200 MPa |
Working pressure |
Steady : 75 % of full scale 100 % of full scale Over range protection : 130% of full scale |
Working temperature |
Ambient : -40 ~ 65 ℃ -20 ~ 65 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 200 ℃ Max. 100 °C (With glycerin filling) Max. 100 ℃ (With silicone filling) |
Degree of protection |
EN60529/IEC529/IP67 |
Temperature effect |
Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale |
Standard features
Pressure connection |
Stainless steel (316SS) |
Element |
Stainless Steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube |
Case |
Black glass reinforced thermoplastic (PBTB) Solid front, Blow-out back Turret style case with built in rear flange lugs |
Window |
Polycarbonate |
Movement |
Stainless steel |
Dial |
White aluminium with black graduations |
Pointer |
Black painted aluminium alloy |
Zero adjustment |
Internal |
Process connection |
⅜", ½" PF, NPT and PF |
Certificates |
Pressure equipment directive (2014/68/EU) Annex III Module H ATEX Ex II GD c IIB TX |
Option |
Zero adjustment : External Window : Safety glass Pressure connection and element : Monel |
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.