Diaphragm Seal Type Pressure Gauge P710,P720,P730,P711,P712 by (주)와이즈

(주)와이즈

02-300-2300

홈 기업찾기 (주)와이즈

1/1

(주)와이즈

Diaphragm Seal Type Pressure Gauge

모델명

시리즈

일반압력계•스위치•기록계

구매 안내

아래는 참고용 정보이므로 세부 조건은 반드시 제조사/판매자에게 문의 바랍니다.

결제 방법

제조사/판매자에게 문의 바랍니다.

납기 정보

제조사/판매자에게 문의 바랍니다.

배송 정보

제조사/판매자에게 문의 바랍니다.

원산지

제조사/판매자에게 문의 바랍니다.

02-300-2300

제품 상세 설명

P710 Series - Screwed process connection (P711, P712) P720 Series - "I" type process connection (P721, P722) P730 Series - Flat type flange process connection (P731, P732)

Service intended

Diaphragm seal type gauges are suitable for the situation where the process medium would corrode the instrument connection and pressure sensing element. Furthermore, this type of gauge is highly recommended in a situation where the process medium contains suspended solids, or if it is sufficiently viscous to clog the instrument connection and pressure sensing element. Additionally, it is recommended to be used where the process medium might freeze or solidify the instrument connection and pressure sending element due to the ambient or process temperature change, and where the process medium requires the flushing from the system to prevent any contamination.

Design	Internal diaphragm
Accuracy	Refer to gauge model
Suitable pressure range (MPa, kPa, bar)	-0.1 ~ 0 to -0.1 ~ 2.5 MPa 0 ~ 0.1 to 0 ~ 35 MPa
Filling liquid	Silicone oil
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Diaphragm material	Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Process connection	Model P710 : PT, NPT and others feasible Model P720, P730 : Flanges to ANSI, JIS or other standard
Upper flange (Gauge side)	Stainless steel (304SS, 316SS, Titanium)
Diaphragm	316L SS, Monel, Hastelloy-C Titanium, Tantalum, Nickel, Alloy20
Under flange (Process side)	Stainless steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C, Titanium, Nickel
Certificates	ATEX Ex II GD c IIC TX
Option	■ Diaphragm and under flange are available in PTFE coating or PTFE lining (See note) ■ Under flange (Process side) are available in purging plug or heating/cooling jacket

자료 다운로드

Catalog-WISE-General Pressure Gauge•Switch•Recorder-Diaphragm Seal Type Pressure GaugeDiaphragm Seal Type Pressure Gauge-P710, P720, P730

문의하기