Description
The electromagnetic flowmeter can be used to accurately measure the flowrate of liquids, paper pulp, slurry and mineral slurry which has an electrical conductivity greater than 10 µs/cm.
F951 is a flow measurement system consists of a flowmeter primary and remote mounted converter.
Applications
- Facilities in water supply, sewerage, agricultural water, industrial water and waste water
- Petrochemical, alkali salt, chemicals and coolant process.
- Circulating water like cement sludge, coal sludge
- Spoke water, waste water, coolant in pulp, paper mill
- Coolant, seawater circulating, in ship building factories
Specification
Type |
Separate type |
Size |
15 ~ 1,000A (½ ~ 40") |
Process connection |
Flange type [ANSI, ASME, DIN, JIS, KS, ETC.] |
Measuring range |
0.2 ~ 10 m/s |
Accuracy |
±0.5 % Full scale (15 ~ 800A) ±1.0 % Full scale (900A ~ : It needs for site calibration.) |
Lining |
Standard : Hard rubber (0 ~ 60 °C) Option : Teflon (-10 ~ 160 °C) Max. 600A |
Ambient temperature |
-10 ~ 60 °C |
Conductivity |
Standard : ≥ 10 µs/cm Option : ≥5 µs/cm |
Power supply |
Standard : AC 85 ~ 250 V, 50 ~ 60 Hz Option : DC 24 V [2-wire Loop power] |
Power consumption |
Max. 15 VA |
Display |
LCD Display with back light Flowrate : 5-Digit Display Total : 9-Digit Display |
Output |
Analog : DC 4 ~ 20 mA (Isolated) - Active Pulse : Open collector purse Communication : RS485 |
Protection class |
Sensor : IP67 Converter : IP67 |
Special feature |
Self check Empty pipe Enable to reverse flow direction Data logging Error message |
Electrode signal cable |
Standard length : 5 M Option : Max. 30 M |
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.