Systone, Glass wool, Isopink, Gypsum board atc.
Byucksan Baritone Panel is convenient to maintain as it is easily wipe in case of surface contamination by dust with low absorptiveness (1.0% or less).
Introduction
Byucksan Baritone Panel has strong durability and high strength as compressed with high temperature after impregnating tens of natural kraft paper and UV coating paper to resin.
Surface is consists of UV coating layers, so it is strong in breaching, discoloration and UV rays, excellent in weather resistance and easy to maintain compared to other exterior systems.
Features
Size
Thickness(mm) | Size (Width x Length) | Pattern |
---|---|---|
8T / 10T | 1,240 x 2,450mm | Wood |
1,240 x 4,900mm |
PATTERN
※ The color of this product may be slightly different from the sample.
Item | Unit | Specific Standard | Test Method |
---|---|---|---|
Density | g/㎤ | 1.40 or higher | KS F 3200 |
Flexural Strength (Length/Width) | N/㎟ | 100 or higher | KS F 3200 |
Tensile Strength (Width/Length) | N/㎟(MPa) | 70 or higher | KS M ISO 527-2 |
Flexural Strength if damp (Length/Width) | N/㎟ | 100 or higher | KS F 3200 |
Bending Failure Load (Length/Width) | N | 4,000 or higher | KS F 3200 |
Absorption Rate | % | 1.0 or lower | KS F 3200 |
Length Change Rate by Absorption | % | 0.2 or lower | KS F 3200 |
Thickness Expansion Rate by Absorption | % | 0.5 or lower | KS F 3200 |
Impact Resistance | - | Shall have no crack or flaking on the surface. | KS F 3200 |
Contamination Resistance (Red Crayon) | - | N/A (Standard Grey, Color Table No.3 or higher) | KS F 3200 |
Acid Resistance | - | N/A | KS F 3200 |
Alkali Resistance | - | N/A | KS F 3200 |
Weather Resistance | Gray scale | Gray scale 4 or higher | ISO 4892-2 (2,000 hours) |
Formaldehyde Emission | mg/L | Average 0.2 or lower | KS F 3200 |
Detailed Drawing
Panel Installation Procedure
Precautions When Installing Panel
1. When constructing panel with screw, must tighten screw with equal strength to each panel and maintain optimum smoothness.
Gasket pad shall be THK1.6mm, and if using thick pad, smoothness is not even.
2. Please be careful not to break the screw head if tightening screw with too much power.
3. Use SST'L screw for the screw. (Stainless 410/Color TOX)
4. Use screw coated with designated color on the head.
5. Construct in consideration of characteristics (construction and expansion) of panel while constructing in each season.