TOP
Low Temperature Plasma sterilizer manufacturer, EXPlasma Z7
LOW TEMPERATURE PLASMA STERILIZER
EXPLASMA Z7
Low temperature sterilization below 60degrees minimizes damage to medical device
Maximize turnover rate of medical device
Economical cost similar to Autoclave
Vacuum system that does not require oil change
Provided IoT-based online sterilization report
CONDENSATION PHENOMENON
Low temperature plasma sterilizers are sensitive to moisture and temperature differences.
If there is moisture or a temperature difference, the hydrogen peroxide used as a sterilant may be on the medical device.
Preheating and moisture removal are very important.
EXPlasma is a sterilization solution that can minimize these problems.
AMR
AUTO MOISTURE REMOVAL
EXPlasma has automatic moisture removal function. So it can be used conveniently and safely even if it has a little moisture or slight temperature difference.
P-ART
POUCH ARTIFICIAL RESPIRATION TECHNOLOGY
P-ART technology is a unique technology of CUBE Instrument.
This can cause the sterilant to penetrate repeatedly into the medical device, such as artificial respiration, and shorten the sterilization time. And it is very effective for temperature transfer and moisture removal.
1st Generation Technology : SAE-I (Sterilization Acceleration Engine) - Chamber "Space Variable Technology" - Technology that optimizes sterilant and heat transfer by changing the pressure inside the chamber. (Patent application, Aug. 2016, registration, 2017. 04 (KR))
2nd Generation Technology : SAE-II - Optimized sterilization acceleration engine efficiency. - After the completion of sterilization, the remaining sterilant is minimized to improve the stability and convenience of the medical device. (Patent pending)
Mode | Flash | Min. 10 Minute |
STANDARD | Min. 20 Minute | |
Temperature | Below 60 degrees | |
Dimension | width | 39 cm |
Length | 44 cm | |
Height | 30 cm | |
Chamber volume | 7 liter | |
Sterilant | H2O2 50 wt% | |
Operation noise | below 60 dB | |
Electrical Requirement | AC 220 V / 60 Hz | |
Power consumption | 1,200 W | |
Total weight | 30 kg | |
Operationg temperature | 18 - 35 degrees | |
Operationg humidity | 10 - 80 |