TOP
Manufacturer of Accumulator, Oil cooler, Sensor
Adventage
• Maintain the fluid temperature at a very low and stable level - depending on the temperature of coolant.
• Particularly suitable for large flows and high cooling capacities and therefore a useful supplement to the brazed range.
• Suitable for a variety of applications and can easily install due to the light and compact design.
• Cost-efficient and environmentally friendly
• Can cater for heavily contaminated or high viscosity fluids, or even if the temperature difference between the hot and cold
Product Feature
• Consist of a stack of individually stamped heat transfer plates and gaskets
• The hot transfer plate is bolted to a frame consisting of a fixed cover and a movable cover.
• Can be easily disassembled for cleaning and maintenance.
• Possible to add more to achieve a higher cooling capacity.
• A variety of size with a number of plates and different stamp design available to cover the most of cooling capacity.
• Depending on working condition, special models using higher grade materials available. (ex. titanium plates for seawater)
Operating Data(1)
Flow range | 0~40,764m/h |
Pressure range | 10~25bar (*Note : Pressure Surges must be avoided) |
Temperature range | -30°C ~+180°C |
Connection | Standard : KS/JIS , ANSI, (Stud or Flange Type) |
Operating Data(2)
Plate material | Stainless steel 1.4401(ANSI316/SS2347) 1.4306(ANSI 304/SS2333), Avesta 254 SMO, Titanium |
Plate thickness | 0.4~0.6mm |
Seal | - NBR : 110°C(High temp:140°C) |
Media | Hydraulic oil, Lubrication oil, Rolling oil, engine oil HFC, HFA, HED, Water, Water-glycol, seawater(with titanium plate) |
Cooling capacity | 0~1,1627kW (dependent on the inlet temperature of the media and the flow rate) |
Contamination | - Level of particles in suspension : within 10mg/liter, - Particle size : 0.6mm(spherical): thread-like particles cause a rapid rise |
Other options | - Safety heat exchanger, Dual unit with change-over valve - Insulation |