Professional Security Passport Laminator 

High-Technology Security Passport Laminator

• Use ultra-thin security Micronex film
• High-technology security passport laminator
• Optimum passport lamination by Cantilever
• Application of high-technology security system
  (operating only after inputing password)
• Prevention of forgery of passport records by ultra-thin lamination impossible to be separated
• Automatic sensing operation
• Accurate lamination of repeat image at correct position

GMP PASSPORT-SMART 100 is a high-technology security laminator using ultra-thin security
Micronex film with cantilever mechanism for optimum passport lamination. 

Also it applies hightechnology security system to operate only after inputing password.
So it prevents from misusing by anyone except the persons concerned. Ultra-thin lamination
impossible to be separated can make perfect prevention of forgery of passport records.

• Use roll type security film
• Quick laminating time below 15 seconds
• Prevent damage of IC chip from heat by necessary spot lamination
• Excellent durability by using super heat-resistant heating roller
• High durability with ulta-heatproof heating roller (by 180℃)
• Automatic cooling of passport after lamination with cooling nozzle
• Automatic exit of passport through conveyor after lamination

Laminator for Crystal Clear High Transparent Photo Frame 

• 2 steps pressure device for Easy board feeding
• Heating roller for removing fine bubbles during lamination
• 4 rollers double pressurizing system for Strong bonding lamination
• Every roller has its own driveline
• Automatic grip function for photographs
• Grip length adjust device
• Photo & Acrylic plate Loading guide
• Dust cleaning removal roller
• Select a laminator for required application
 - Top heating roller for C.ART lamination only (in CRYSTALAM-14C)
 - Top & bottom heating roller for both side pouch lamination & C.ART lamination (in CRYSTALAM-14CLP)

Print resolution of digitial press & small sized photo printers are getting higher, but its prices are getting decreased. On the basis of this circumstance, the photo print business is being bigger and photo frame market is also required for more added-value solution.
GMP CRYSTALAM-14C/CLP was developed under the above current market needs and the laminator was designed for C.ART (CRYSTALART) photo frame job. The laminators are the world first laminator to make photo frame with acrylic plate. GMP lamination technology makes CRYSTALAM-14C/CLP to make photo frame easily and perfectly with no minuite bubbles on the results to satisfy your customers.

This machine, designed for heavy work load, is with its heavy-duty and solid build in order to carry out lamination job more efficiently by high speed of 6 rollers which enhances high-bonding productivity for laminating digital print-outs. 
This versatile pouch & roll combination laminator performs the capability of continuous lamination in the easy web roll-to-roll method very effectively.

KEY POINTS of INNOVATION for FASTSYNC-OMNI 320

^ High-Bonding Versatile Desktop Pouch & Roll laminator for Digital Print-outs
^ With Unwinder & Rewinder installed, Easy roll lamination job including Sleeking
^ Feed-trays installed on each front & rear side for user-friendly convenience purpose
^ High speed lamination by 6 rollers system for increasing productivity
^ Clam Shell Type Roll Coverings for Easy Cleaning and Maintenance
^ Efficient Cooling System Supports High Speed Laminating
^ Easy Step Optimal Setting on Temperature & Speed synchronized with Film Thickness

FEATURES of FASTSYNC-OMNI 320

- Designed for Hot & Cold Laminating, Mounting, Transfer
- Professional laminator for various lamination
- Sophisticated Roller assures perfect laminating of any type of film
- Precise and Solid Diecasted inner structure assures long time operation
- Laminating without warm up time through GMP Synchro Control System any paper or film thickness can be laminated by step control of temperature & speed at once
- Roller Temperature Control via Shaft Touch Sensor

Professional 10 Jobs with One Machine

1. Hot Lamination
2. Cold Lamination
3. Mounting upto 3mm
4. Micronex Pouch Overlay Coating
5. Gloss and Matt Sleeking
6. Metallic Foil Sleeking
7. Hologram Sleeking
8. Embossing Lamination
9. Thermal Transfer
10. Roll to Roll Laminating 

Professional Laminator for Hot, Cold lamination and Mount & Transfer.
Hot & Cold Pouch Laminator with Innovative Technology & Economical price. 

▶ Only 3 minutes roller warm-up time
▶ No overheating makes durability of roller much longer
▶ Equally stable laminating quality by precise roller temperature control
▶ Easy to clean rollers simply by opening top cover
▶ Improved safety heater protects the roller from fire and damage
▶ Various jobs available for hot & cold lamination, mount & transfer
▶ Powerful cooling system for continuous lamination
▶ Adjustable temperature and speed for various thicknesses 

▶ High accuracy - accurate temperature control by 1 degree celsius
▶ High convenience - indicate a real temperature of the roller(LAMEX-325)
▶ Quick heating-up - quick heating in safety with internal infrared heating system
▶ Simple & convenient operation - touch control for 6-step speed adjustment for Lamination thicknesses synchro system with function keys that have optimized Laminating conditions(LAMEX-325)
▶ Stability - stable temperature control in continuous lamination with cooling fan
▶ Energy saving - save 50% of energy with quick heating and accurate temperature control
▶ Power saving - automatic stand-by mode in no operation for half an hour(LAMEX-325)
▶ Safety - automatic power off in no operation for 2 hours after stand-by mode(LAMEX-325)

Professional passport Laminators

With improved engineering, GMP has developed the first hot roller closed book passport laminator. Simple to operate and efficient to process readable passports requiring hot lamination inside the front or rear covers to protect and secure the variable data and photographs.
Internally adjustable for 32 to 64 page books.

▶ Compact and stylish, with high performance design features
▶ Produce quality results over extended periods of professional use
▶ Built to the highest specifications of hot roller technology
▶ 8 bit microprocessor controlling pre-set functions for ease of use
▶ Perfect results on passport lamination

Using the Passport LSI and additional engineering, GMP has developed the first hot roller closed book passport laminator. Simple to operate and efficient this machine will process all machine readable passports (MRPs) requiring hot lamination inside the front or rear covers to protect and secure the variable data and photographs.

In this chromatic silver PHOTONEX-SYNC and ivory color SUPERNEX-SYNC comes the new generation of hot roller laminator. 
Beside its new synchro control system for easy operation and setup the new standardization for next generation of Lamination, implementation of infrared temperature sensor and more detailed speed increments with faster maximum speed allow more professionally-finished lamination. 
The new control system gives direct control of speed and temperature via quick change for the best condition of laminating.

▶ Designed for Hot & Cold Laminating, Mounting, Transfer
    - Professional laminator for various lamination
▶ Elegant look & solid body
▶ Efficient Cooling System supports high speed laminating
▶ Sophisticated Roller assures perfect laminating of any type of film
▶ Precise temperature via internally heated rolls with temperature control via infrared non-contact sensors
▶ Laminating without warm up time through GMP Synchro Control System any paper or film thickness can be laminated by the step control of temperature & speed at once
▶ Easy step setting of temperature & speed as following film thickness

▶ Easy Operation - Pre-set key according to the type of operation
▶ Safe Operation - Cooling fan assures stable temperature keeping for long time operation
▶ Power saving - Auto “Stand-by”(No operating over 30 minutes)
▶ Safety - Auto “Shut off”(No operating over 2 hours in standby mode)

In this ivory color SUPERNEX-SYNC325R6 comes from the new generation of hot roller laminator.
Beside its new synchro control system for easy operation and setup the new standardization for next generation of lamination , implementation of infrared temperature sensor and more detailed speed increments with faster maximum speed (2.15m/min 10 sheet of A4 paper) allow more professionally-finished lamination. 
The new control system gives direct control of speed and temperature via quick change for the best condition of laminating.

▶ High speed for Hot & Cold Laminating, Mounting, Transfer
    - Professional laminator for various lamination
▶ Transparent Top Cover
▶ Efficient Cooling System supports high speed laminating
▶ Sophisticated Roller assures perfect laminating of any type of film
▶ Precise temperature via internally heated rolls with temperature control via infrared non-contact sensors
▶ Laminating without warm up time through GMP Synchro Control System any paper or film thickness can be laminated by the step control of temperature &speed at once
▶ Easy step setting of temperature & speed as following film thickness

Guide to lamination

Whatever the application brings-Lamination service shop, Print shop, Photo shop, Photo copy shop, Advertising material manufacturer, ID card issuing agency, etc.

Variable temperature & speed control
Heavy-duty and high performance A3 and A2 machines. 
Advanced hot roller technology offers a variety of applications including color foil printing, color or black / white image transfer, mounting onto lamiboard, glossing and matting, photo lamination and cold film processing.
8-bit microprocessor has pre-set functions, speed and temperature control, reverse switch and LCD display monitors showing pre-set conditions.

▶ Carrier-Free Operation
▶ Hot & Cold Lamination
▶ Color printing foil Transfer
▶ Lamiboard Mounting up to 3mm
▶ Choice of Machine A3,A2
▶ Quick and Simple to Use
▶ Quality Hot & Cold Lamination
▶ Variable Temperature & Speed control
▶ One-touch, Pre-set Function Keys
▶ Roller Protection System
▶ Hot roller technology for Bubble-Free photo lamination 

4 Jobs in One machine

1. Hot Laminating
2. Micronex Laminating
3. Cold Laminating
4. Mounting

Heavy-duty and high performance A3 machines. 
Advanced hot roller technology offers a variety of applications including color foil printing, color or black / white image transfer, mounting onto lamiboard, glossing and matting, one side photo lamination and cold film processing. 
8-bit microprocessor has pre-set functions, speed and temperature control, reverse switch and LCD display monitors showing pre-set conditions.

▶ Carrier-Free Operation
▶ High Speed Hot & Cold Lamination
▶ Mounting up to 3mm
▶ Hot Roller Type
▶ Hot and Cold Laminating
▶ Variable temperature control
▶ Variable speed control
▶ Roller Protection system
▶ Reverse button

Multi-purpose Laminator offers 9 more functions

1. Heat seal Lamination (Tamper-proof, long term preservation)
2. Lamination for a wide variety of patterns (Heat sensitive lamination)
3. Cold lamination (Pressure sensitive lamination)
4. Cold printing (Terrific cold print on black / white photocopies)
5. Glossing
6. Lamination for Soft Table Matts (Rigid, soft, many different patterns)
7. One Side Lamination 
8. Transferring 
9. Mounting

Whatever the application brings - Lamination service shop, Print shop, Photo shop, Copy center, Advertising material manufacturer, ID card issuing agency, etc.
Max. Speed 1.26m/min : 320R4 (6pages of A4) / 470R4 (4pages of A3) 

▶ Designed for Hot & Cold Laminating, Mounting,Transferring
▶ Clam shell type roll covering for easy of cleaning and maintenance
▶ Easy step for setting temperature & speed as following film thickness
  - Easy Operation - Pre-set key according to the type of operation
  - Safe Operation - Cooling fan assures stable temperature keeping for long time operation
  - Expense -Saving Turn over of Stand-by mode after one idle hour, Sources of Electricity off after two idle hours and power down after 30 minutes 

▶ Elegant look & solid design
▶ Efficient Cooling System supports high speed laminating
▶ Sophisticated Roller assures perfect laminating of any type of films
▶ Precise temperature via internally heated rolls with temperature control via infrared non - contact sensors

FASTSYNC-320R6 is a high speed pouch laminator with 6 rollers and makes no air bubbles when laminating color prints or pictures.
Speed and temperature are controlled automatically through semi - permanent infrared non- contact temperature sensor.
Max. Speed 2.8m/min : 320R6 (13pages of A4) / 470R6 (9pages of A3)

▶ Designed for Hot & Cold Laminating, Mounting, Transferring
    - Professional laminator for various lamination
▶ Clam shell type roll covering for easy cleaning and maintenance
▶ Efficient Cooling System supports high speed laminating
▶ Sophisticated Roller assures perfect laminating of any type of film
▶ Precise temperature via internally heated rolls with temperature control via infrared non-contact sensors
▶ Precise and Solid Diecasting inner structure assures long time operation
▶ Laminating without warm up time through GMP Synchro Control System, any paper or film thickness can be laminated by the step control of temperature & speed at once
▶ Easy step for setting temperature & speed as following film thickness