Factory automation manufacturer, Oil skimmer, Cleaning machine, Dust collector, Oil separator, Chiller and more
It can be used for water-soluble or water-insoluble coolant filtering of all machine tools.
It can be used in rough grinding and finishing line of all nonmagnetic machine tools.
(However it is just available in the chip, whose size is less than 200mm)
Organization
It has a integral structure combining chip CONV' and drum. Dirty coolant induced from machine is separated and filtered to chip and clean water by drum filter. Clean water is sent to clean tank and resupplied to machine and chip and other floating matters that did not pass drum are discharged to chip box by CONV'.
Characteristic
Because it has an integral structure combining CONV' and drum, the secondary filtering is not necessary, installation area is small and running cost is low.
In order to prevent mesh media of drum from being clogged, washing unit is attached so it is possible to use mesh media for a long time.
If specially manufactured magnet plate is installed in CONV', steel and FC chip can be filtered.
Option
COOLER, cutting oil sterilization unit and AERATION unit.
Structure diagram
It can be used for water-soluble or water-insoluble coolant filtering of all machine tools.
It can be used in rough grinding, finishing and grinding line of all magnetic machine tools.
(However it is just available in the chip, whose size is less than 100mm)
Organization
When dirty coolant is induced from machine, chip & sludge is settled by specially manufactured magnet plate attached to the bottom of CONV' and discharged to chip box by scraper and clean water is sent to clean tank by overflow guide and resupplied to machine by pump.
Characteristic
Magnet plate is made of STS cover so that its structure is free from scratch of scraper.
Its structure is organized to maximize the prevention of whirlpool, which occurs when dirty water is induced to CONV'.
Option
COOLER, cutting oil sterilization unit and AERATION unit.
Structure diagram
It can be used for water-soluble or water-insoluble coolant filtering of all machine tools.
It can be used in finishing and grinding line of all magnetic machine tools.
(However it is just available in the chip, whose size is less than 100mm)
Organization
When dirty coolant is induced from machine, chip & sludge is settled by specially manufactured magnet plate attached to the bottom of CONV' and sent to chip box by scraper and clean water is induced to pendulous box, sent to clean tank and resupplied to machine by pump.
Characteristic
Specially manufactured pendulous box plays the role to improve filtering capacity by enabling steel and FC chip & sludge to attach on magnet plate well.
Magnet plate is made of STS cover so that its structure is free from scratch of scraper.
Its structure is organized to maximize the prevention of whirlpool, which occurs when dirty water is induced to CONV'
Option
Cutting oil sterilization unit and AERATION unit.
Structure diagram
General grinding of FC & steel
Organization
Dirty coolant is induced from machine to magnet separator and it is divided into sludge and clean water. Clean water is sent to clean tank and sludge is discharged to sludge box.
Characteristic
It is used in the machine tool that does not require big filtering capacity. Its structure is simple so it can minimize installation area.
Option
LEVEL GAUGE, OIL SKIMMER, COOLER, Cutting oil sterilization unit
Structure diagram
General grinding of FC & steel. Cutting and grinding of grinder, washing machine, broaching machine and general grinder
(However it is just available in the chip, whose size is less than 100mm)
Organization
Dirty coolant, which is induced from machine is sent to and filtered in magnet separator by way of magnet chip CONY'
Characteristic
It can perform precision filtering after removing short chip and partial sludge discharged in rough grinding and finishing process.
Because it performs filtering in magnet separator after the primary filtering, its high sludge removal ratio can be applied to the machine that performs a lot of grinding and polishing work.
Option
LEVEL GAUGE, OIL SKIMMER, COOLER, Cutting oil sterilization unit
Structure diagram
Purpose
It can be used for water-soluble coolant filtering of all machine tools.
General grinding, polishing and washing of FC & steel.
Organization
When DIRTY COOLANT is induced from machine, sludge and partial 지석 powder are discharged to sludge box by magnet separator and filtered clean water is sent to the primary clean tank, sent to auto clean again by pump and it is minutely filtered into 지석 powder and clean water. The clean water completing the secondary filtering is resupplied to machine.
Characteristic
Because auto clean performs the secondary filtering, the degree of filtering is high.
Because auto clean is a cyclone system using centrifugal force, it does not require maintenance.
Option
LEVEL GAUGE, OIL SKIMMER, COOLER, Cutting oil sterilization unit
Structure diagram
It can be used for water-soluble coolant filtering of all machine tools.
It can be used for nonmagnetic machine tool. (However, it is available in the chip, whose size is under 200mm)
Organization
When dirty coolant is induced from machine to drum chip CONV', chip is discharged to chip box by scraper and clean water passing through drum filter is sent to the primary clean tank, sent to auto clean again by pump and it is minutely filtered into sludge and clean water. The clean water completing the secondary filtering is resupplied to machine.
Characteristic
Because auto clean performs the secondary filtering, the degree of filtering is high.
Because auto clean is a cyclone system using centrifugal force, it does not require maintenance.
Option
LEVEL GAUGE, OIL SKIMMER, COOLER, Cutting oil sterilization unit
Structure diagram
It can be used for water-soluble coolant filtering of all machine tools.
Cutting and grinding of FC & steel, etc. It is used for the device requiring high degree of filtering.
Organization
When dirty coolant induced from machine, MAGNET CONV' discharges chip and partial sludge to chip box and sends filtered clean water to the primary clean tank
Pump sends the primary clean water to auto clean for minute filtering and it discharges dirty water containing sludge and 지석 powder to magnet separator and sends clean water to the secondary clean tank.
The secondary clean water is resupplied to machine by pump.
Characteristic
Because auto clean performs the secondary filtering, the degree of filtering is high.
Because auto clean is a cyclone system using centrifugal force, it does not require maintenance.
Option
LEVEL GAUGE, OIL SKIMMER, COOLER, Cutting oil sterilization unit
Structure diagram
Precision filtering of grinder, washing machine, ceramic processing machine and other nonferrous metal materials
Organization
Dirty coolant, which is induced from machine, is naturally filtered by gravity in paper filter and clean coolant is resupplied to machine by pump.
The paper filter is transferred by FLOAT S/W and with sludge, it is discharged to sludge box.
It is proper for the machine requiring precision filtering such as grinding or polishing process. (Degree of filtering depends on paper media. 10㎛~100㎛).
When coolant is supplied, over flow does not occur. It is designed to replace paper filter in advance by detecting the consumption limit of paper filter.
Structure diagram
Precision filtering such as precision grinding, polishing and washing of FC & steel.
When dirty coolant is induced from machine, sludge is discharged to sludge box by magnet separator. The clean water completing the primary filtering in magnet separator is naturally filtered by gravity in paper filter and clean coolant is resupplied to machine by pump The paper filter is transferred by FLOAT S/W and with sludge, it is discharged to sludge box.
Characteristic
It maximizes the filtering efficiency by unifying magnet separator and paper filter.
It is proper for the machine requiring precision filtering such as grinding or polishing of steel & FC.
(Degree of filtering depends on paper media. 10㎛~100㎛).
It is designed to replace paper filter in advance by detecting the consumption limit of paper filter.
Structure diagram
