TOP
JRV-SF31 (Direct Acting Type)
The direct impingement type pressure relief valve guarantees stable operation for small capacities as well as larger capacities. It can be applied to high pressure air, gas or liquid lines. By adopting pressure equalizing type of disk, there is minimal changes to the pressure on the secondary side caused by changes on the primary side. This allows for precise controls.
Product specification
MODEL | FORMAT | APPLICABLE LIQUIDS |
CORRECT TEMPE RATURE TO BE APPLIED |
CORRECT PRESSURE TO BE APPLIED MPA (KGF/CM²) |
MAXIMUM PRESSURE REDUCTION RATE |
MINIMUM DIFFERENCE IN PRESSURE MPA (KGF/CM²) |
HOW TO CONNECT THE PRODUCT |
MATERIAL | ||
---|---|---|---|---|---|---|---|---|---|---|
JRV-SF31 | Direct impingement type (diaphragm) |
Gas Liquid |
-20~80 | Primary side | Secondary side |
10:1 | 0.05(0.5) | JIS B 2220 10K,20K, 30K RF Flanged |
Main body | Key part |
3.0 (Lower than 30.0) | 0.035~0.5, 0.5~1.5 (0.35~5.0, 5.0~15.0) |
Cast Steel | Stainless Steel, Synthetic Rubber |