Harness equipment manufacturer, Crimping machine, Processing machine, Cutting machine, Applicator
KM-707 Digital Cutting & Stripping Machine
Most appropriate soultion for battery cables ( 0.8sqmm to 30sqmm)
Battery cable needs to be cut and stripped very precisely and has a clean edge because it delivers power to each single moving parts just like human vessel distributes energy to every organ of the body.
KM-707 is designed to process up to 30 sqmm AV type battery cables. An additional function, middle stripping (window stripping) enables you to process KV(power cable) and multi-core cables as well. Easy to program and replace parts are standard.
Features
- Graphic display for easy set-up
- Push button set-up of all machine functions
- Auto knife sensoring for stripping blade set-up
- Up to 100 recipes for saving of standard set-ups
- Count of pieces needed
- Total pieces run
- Short mode for wires less than 35mm long(In case of KM-706, short mode for wires less than 18mm long)
- Set-up of optional collection equipment and optional wire twister
- Single-step cycle
- Reverse button for removing wire from machine / Forward button for feeding wire through the guide pipes
- Cut botton for testing cutting of material
- Emergency stop button on panel
- Five stepping motors and three drivers for feeding and cutting
- Five line knife(Three line knife on KM-703N) set-up
- Automatic lifting function of discharge rollers during feeding to prevent damage to wire
- wire run-out and/or tangle detectors
- Roller gap adjustment for various size wires
- Five wire guide pipes (Three guide pipes on KM-703N)
- An air pipe for insulation chip removal during the cycle
- Filter & regulator for pneumatic system
‣ Auto Strip Sensor : Auto knife sensoring for stripping blade set-up. (Patent No. 0285069)
‣ Roller Up&Down Button : With a simple-button press, discharge rollers can be open and close.
‣ Feeding Part
- Six rollers for highly accurate feeding and stripping.
- Discharge rollers open during feed to protect leading wire end.
‣ Cutting Part
- Five line knife system allows the running of five wires at once for high production
- Blade life time is estended maxium five times compare to competitor’s model
- An air pipe removes insulation chip during operation.
Specification
| Wire range | AWG1 ~ AWG8(0.8sqmm ~ 30sqmm) |
| Wire type | AV, UL, AVS, AVSS, KV, KIV, Teflon Wire |
| Cutting length | 18mm ~ 9999.9mm |
| Stripping length | 0mm ~ 35mm |
| Air consumption | less than 0.1 CFM |
| Power supply | 110/220 VAC, 50/60 Hz, Single Phase |
| Power consumtion | 80 Wat ~ 650 Wat |
| Dimensions(W x D x H) | 750 x 570 x 700 |
| Weight(kg) | 95 |
* Specifications are subject to change without notice.
■ Wire Straightening Unit SOP-713 : straightening wires during feeding
■ Wire Reciever SOP-715 : Collects processed wires less than 800mm or 1600mm long
■ Wire Reciever SOP-716 : Collects processed wires more than 2000mm
