TOP
DVI, HD-SDI, AV, RGB, Total control, Total control system developer
1. Description
■ This switcher enables 8 audio/video signals to be selected and sent to 2
independent display devices for routing and monitoring in A/V conference hall,
broadcasting station, cable TV production etc
■ It could be two separate selectors as there are 2 outputs (out1, out2).
■ A specific selector is available for each output.
■ Two separate outputs provide Matrix function by sending signals to each device
simultaneously..
■ It can be changed a specific signals by selecting the output number and
pressing the input select button. As operate the buttons from front panel, both
input/output signal lights will be turned on.
■ A rear panel RS-232C control port provides connection of PC to an easy control
system.
2. Panel Drawing
3. Specification
■ Audio Part
- Input/Output number : 8 x 2
- Input type : Unbalanced stereo, 47Kohm
- Output type : Unbalanced stereo, 600ohm
- Input/Output connector : RCA
- Max level : 13dBm
- Frequency response : ±0.1dB(20Hz ~ 20kHz)
- Crosstalk : below 80dB
- S/N : below 80dB (20Hz ~ 20kHz)
■ Video Part
- Input/Output number : 8 x 2
- Input/Output type : Composite video 1Vp-p, 75ohm
- Input/Output connector : RCA
- Frequency response : ±0.3dB(to 107MHz)
- Differential phase error : 0.5°at 3.58 & 5MHz
- Differential gain error : 0.5% at 3.58 & 5MHz
- Crosstalk : below 55dB
- S/N Ratio : Below 65dB
■ Remote Control Part
- Serial control : 1 RS-232, d-sub 9pin connect
■ Case & Power Part
- Power source : AC 110/220V 60Hz ±10%
- Temperature : 0℃ ~ 40℃
- Power consumption : below 6Watt
- Type : 19” Rack type
- Dimensions : 483(W) * 44.5(H) * 325(D) mm