TOP
DVI, HD-SDI, AV, RGB, Total control, Total control system developer
1. Description
■This device provides the ability to route 8 analog audio/video input signals to a
channel.
■ Enable to control input/output by front control key. A rear panel RS-232C control
port provides remote control function.
■ Memory back-up function helps to memorize the last status while it is turned off.
■ There is a monitoring port upon input selection. LED Switch enables to check
status of the selection.
2. Panel Drawing
3. Specification
■ Audio Part
- Input/Output number : 8 x 1
- Input/Output type : Unbalanced stereo, 600ohm
- Input/Output connector : RCA
- Max level : 14dBm
- Frequency response : ±0.1dB(20Hz ~ 20kHz)
- Crosstalk : below 80dB
- S/N : below 80dB (20Hz ~ 20kHz)
■ Video Part
- Input/Output number : 8 x 1
- Input/Output type : Composite video 1Vp-p, 75ohm
- Input/Output connector : BNC
- Frequency response : ±0.1dB(750KHz ~ 4.7MHz)
- Differential phase error : 0.1°
- Differential gain error : 0.1%
- Crosstalk : below 60dB
- Sync : Standards, BNC, 75ohm
■ Remote Control Part
- Serial control : 1 RS-232, D-sub 9pin connector
■ Case & Power Part
- Power source : AC 85 ~ 240V 50 ~ 60Hz
- Temperature : 0℃ ~ 40℃
- Power consumption : Below 20Watt
- Type : 19” Rack Type
- Dimensions : 483(W) * 44.5(H) * 300(D) mm