1. Description 

○ This equipment is used for transmitting high resolution analog SXGA(1280 x 1024)
    RGB signals up to 100 meter with high resolution quality by using the Category
    5.5E,6(UTP) cable.  

○ You can also use it, setting one between audio(mono) signal and data signal in
    advance by using Category 5.5E,6(UTP) cable.  

○ As transmitting equipment, MRU-100T is used for transmitting up to 100 meter. 

○ As receiving equipment, MRU-100R restores the signals received far from
    MRU-100T through UTP line.  

○ It includes Gain and EQ function for adjusting received signals, and it also has
    function for adjusting each color delay line. 

○ Having one port for distributing function, MRU-100T can be monitored previous
    transmitted condition. Audio and data selecting switcher are attached on the front
    panel. 
 

  
2. Panel Drawing

3. Specification 

○ Transmitter / MRU-100T
  - Input signal : 1 analog input RGBHV, RGBS, RGsB
  - Loop output : 1 analog output RGBHV, RGBS, RGsB
  - Connector type : Input 1 15pin HD female, monitor 1 15pin HD female, output 1
                                RJ-45
  - Audio or Data Input /Connector : mono unbalanced / stelvio or RS-485 data /
                                                        stelvio
  - Bandwidth : 350MHz
  - Power input : DC 9V 850mA (Power adaptor)
  - Dimension : 150(W) * 26(H) * 100(D) mm 
 
○ Receiver / MRU-100R
  - Input signal : 1 analog input RGBHV, RGBS, RGsB
  - Connector type : input 1 RJ-45, output 1 15pin HD female
  - Audio or Data output /Connector : mono unbalanced / stelvio or RS-485 data /
                                                           stelvio
  - Bandwidth : 350MHz
  - Power input : DC 9V 1A (Power adaptor)
  - Dimension : 150(W) * 26(H) * 100(D) mm