1. Description 

○ This is a remote camera control unit to control power supply of camera, lens
     and  pan/tilt in a near location.  

○ Controlled via front switches, built-in correspondent ports enable to control
    operating soft ware.

○ The front LED panel enables easy view of the operating status.
 

  
2. Panel Drawing

3. Specification 

○ General Part
  - Camera control port : 2 Port (Pan/Tilt, Lens, Power Control)
  - CPU : 8 Bit Micro Processor 89C52
  - Clock : 11.0592 MHz
  - Connector : D-Sub 9 Pin Female
  - Communication : Serial RS-232C 1Ch, Baud 9600, N, 8, 1
  - Watch dog diagnostic 
  - Lens control : ±6V - ±12V (±12V Setting)
  - Pan/Tilt control : AC 24V – 220V (24V Setting)
  - Input cord : 3 Pin GND svp 
 
○ Case & Power Part
  - Power source : AC 220V / 60Hz
  - Temperature : 0℃ ~ 40℃ 
  - Power consumption : Below 70Watt
  - Type : 19” Rack Type
  - Dimensions : 483(W) * 89(H) * 300(D) mm