DVI, HD-SDI, AV, RGB, Total control, Total control system developer
1. Description
○ Video UTP Receiver enables to send video signals from Video Transmitter
(MVUT-100) through UTP to Composite Video signals.
○ Video Output supports NTSC/PAL. UTP Cable used CATEGORY 5,5E,6 types.
Transmitter and receiver are needed to be connected point-to-point and
controlled RS-485 signal for PAN/TILT through UTP cable so it’s not necessary
to install extra cable.
○ Camera connection is composed of 24 channels. Upon extensional installation
required, it is made easy through link.
2. Panel Drawing
3. Specification
○ General Part
- Video Input Port : 24 ch
- Data Input Port : 24 ch
- Video Output Port : 24 ch / loop out 24 ch
- Data Output Port : 1 ch (link out 1 ch)
- Video/Data : 1000m
- Video Input : Balanced Differential Signal 100 Ω, RJ-45
- Video Output : 1Vp-p Composite Video 75Ω ,NTSC/PAL,RCA Connector
- Cable : UTP category 5,5e,6 AWG24-4P
- Internal Operation Frequency : 200MHz, -3dB
○ Case & Power Part
- Power source : AC 220V 60Hz /1A
- Temperature : 0℃ ~ 40℃
- Weight : 11.8Kg
- Type : 19" Rack type
- Dimensions : 483(W) * 176(H) * 338(D) mm
