TM-1003
This device is used to detect the changes in the size of shadows blocked by a measured object. 
It can be used to detect bumps and dents in all types of manufacturing lines, such as vinyl wires, communication cables, power cables, fiber optic cables, enamel wires, coated wires, and pipes.
It is a non-tactile type that performs high speed, continuous detection, and it is easy to handle.     

TM-3002W

The measurement range is 0.1~35mm. It is composed of two axes. The detectable size of concave-convex can be set to 0.5~10mm. 
The fault detection signals are generated as contact points and analog signals. Its top is open wide, so that it can easily pass through the cable.   

TM-3004WA

The measurement range is 0.1~35mm. 
It can detect in four axial directions. Compared to two axial types, it has minimal grey areas. It is octagonal in shape, surrounding the surface of cable to perform perfect fault detection.    

TM-4002

This is the most frequently used model for power cables. The measurement range is 0.1~60mm, and it is composed of two axes.
You can set it to 0.15~10mm. If it is out of range, then some signals will be outputted.    

TM-6004

This model is used to detect concave-convex on the surface of thick cables with 1~80mm.
It has four axial detection and supports detection on an octagonal surface.
The thicker the cable is, the larger the grey area is. To minimize the grey area, it adopts eight axes with 16-gonal detection surfaces. For this purpose, you can combine two sets of TM-6004.    

Product Specs

Composition	For fine wire/Cable
Model	TM-1100XY	TM-1003W	TM-1104
Detectinf direction	2	3	4
Measuring range	0.02 ~ 5mm
Detecting sensitivity	0.01 ~ 1 mm
Slit Length	18 mm	12 mm	18 mm
Silt width	0.5 mm
Line speed	1m/min ~ 1500m/min
Alarm time	0.5 sec	0.05sec	5sec
Power supply	AC 100V 50/60Hz	DC ±15V	AC 100V 50/60Hz
Outside dimension	260*265*60	150*140*40	350*280*55
Weight	2.5kg	1kg	5kg

Composition	For middle dia. wire/cable
Model	TM-3001W	TM-3002W	TM-3004W	TM-3008W	TM-3016W
Detectinf direction	1	2	4	8	16
Measuring range	0.1 ~ 35mm
Detecting sensitivity	0.5 ~ 10 mm
Slit Length	48 mm
Silt width	1 mm
Line speed	1 m / min ~ 1500 m / min
Alarm time	0.05 sec
Power supply	AC 100V 50 / 60Hz
Outside dimension	260*90*41	260*260*60	370*335*60	370*335*120	370*335*240
Weight	1.5kg	3kg	6kg	12kg	24kg

Composition	For Large dia. wire /cable/ pipe
Model	TM-4001	TM-4002	TM-4004	TM-4008	TM-4016
Detecting direction	1	2	4	8	16
Measuring range	0.1 ~60mm
Detecting sensitivity	0.15 ~10mm
Slit length	70 mm
Slit width	1.5 mm
Line speed	1m/min ~1000m/min
Alarm output	Yellow or Red LED turns on, Relay contact output.
Alarm time	0.5 sec
Power supply	AC 100 V 50/60Hz
Outside dimension	540*160*100	630*560*160	807*674*136	807*674*272	807*680*424
Weight	7kg	25kg	38kg	76kg	152kg

Composition	For Extra. Large dia. wire /cable/pipe
Model	TM-6004		TM-6008		TM-7003		TM-7009
Detecting direction	4		8		3		9
Measuring range	1 ~ 80mm				1 ~ 130mm
Detecting sensitivity	0.2 ~ 10mm
Slit length	90mm				140mm
Slit width	2 mm
Line speed	0.3m/min ~ 500m/min
Alarm output	Yellow or Red LED turns on, Relay contact output.
Alarm time	0.5sec
Power supply	AC 100 V 50/60Hz
Outside dimension	720*660*1153	720*660*306		990*930*1125		990*930*375
Weight	38kg	76kg		40kg		120kg