This product is manufactured by
UNISON HKR
Manufacturer information
UNISON HKR
Industrial Plant Design and maintenance, pipe support, hanger, bridge bearing, expansion joint, sound proof wall and more
Inquiry
How to order
Problem with product info?
Update request
Manufacturer
UNISON HKR
Brand
-
SKU
141040
Product Name
Metallic Expansion Joint
Model Name
-
Size
-
Weight
-
Product Details
SINGLE TYPE EXPANSION JOINT-UN TIED (MSN)
 |
The simplest form of expansion joint, of single bellows construction, designed to absorb all of the movements of the pipe section in which it is installed. According to operated pressure of a device, this model is manufactured with or without the shrink ring. |
SINGLE TYPE EXPANSION JOINT-TIED (MST)
 |
This model, with the tie-rod assembly, is an improvement on the Single Type Expansion Joint. This model is designed for pipelines with lateral movements. Tie-rods are designed to sustain the thrust generated during operation. |
UNIVERSAL TYPE EXPANSION JOINT-UN TIED (MUN)
 |
A universal expansion joint contains two bellows joined by a intermediate pipe for the purpose of absorbing any combination and angular rotation. This model is used for pipelines with bigger lateral movements than the single type. |
UNIVERSAL TYPE EXPANSION JOINT-TIED (MUT)
 |
This model, with a tie rod assembly, is an improvement on the un-tied universal type. The tie rod absorbs the thrust, which may damage the device. |
HINGE TYPE EXPANSION JOINT (MSH)
 |
A hinged expansion joint contains one bellows and is designed to permit angular rotation, by the use of a pair of pins through hinge plates attached to the expansion joint ends. The hinge arms and hinge pins must be designed hinged expansion joints should be used in sets of two or three to function properly. |
GIMBAL TYPE EXPASION JOINT (MSG)
 |
A gimbal expansion joint is designed to absorb combined movements by use of two pairs of gimbal arm and gimbal pin, which restrains the thrust of the expansion joints should be used in sets of two or three to function properly just like hinged expansion joints. |
PRESSURE BALANCED TYPE EXPANSION JOINT (MSB)
 |
If the diameter of the pipe is excessively large or high pressure is running in the pipes, anchors must be installed to restrain the thrust of the expansion joint . However when conditions would not allow the installation of anchors, this pressure balance type expansion joint has to be used. According to the location of installation, L type (MSB-Bent Pipe Balanced) or S type (MSS-Straight Pipe Balanced type) is used. |
RETANGULAR TYPE EXPANSION JOINT (MSQ)
 |
This product is designed to absorb heat expansion around large-scale rectangular line of high temperature and low pressure. This model is also designed to absorb movements and vibration of the dust collector, the exhaust duct, and the ventilator. |
EXPANSION BELLOWS FOR HEAT EXCHANGER
 |
The expansion bellows for heat exchanger is used to restrain the heat stress, which is generated by temperature difference between the heat exchanger, the bellows prevent the heat stress from reaching the body or the tube. |
CROSSOVER PIPE
 |
For the purpose of use for transfer the steam from LP Hood where steam turbine system. And it shall have suitable flexibility due to the different thermal movement between Turbine and casing. Also it shall have stability for the steam pressure when operating. |
UNDERGROUND TYPE EXPANSION JOINT
 |
It is built to absorb the land pressures and seismic against the duct breakage because of the ground settlements and the earthquake shocks. |
CRYOGENIC BELLOWS FOR LNG CARRIERS
 |
HKR designs & manufactures a wide variety of bellows type expansion joints rating from 3/8” to unlimited size of nominal diameter in accordance with the EJMA, ASME, IGC, GTT and special code required from customers. Our products for LNG Carriers are inspected and certified by LIyod’s Register, ABS, DNV, BV, KR, GTT. |
Industrial Plant Design and maintenance, pipe support, hanger, bridge bearing, expansion joint, sound proof wall and more
UnisonHKR Co., Ltd. has developed core technology and the best quality in plant and construction business becoming the unquestionable leader of the industry.
The plant division covers piping support, expansion joint and damper businesses based on the technology accumulated as the industry-leading company, supplies its products to many domestic power plants as well as piping lines of top-class plants overseas.
Construction Business Unit is responsible for construction, technology development and production of seismic isolation, seismic bearings and vibration control devices which support bridges or buildings and increase safety against earthquakes and wind loads. It also produces other construction materials such as bridge expansion joints, soundproof walls, composite sheet piles, and has established business divisions for materials supply, monorail construction and special business.