Advantages

1. High reliable working

2. Manual discharge valve is sticked.  

3. No loss of compressed air    

4. Optimum determination of float location    

5. Easy maintenance      

6. Visible working status     

7. No need electric connection

8. Easy installation

Applications

1. AIR COMPRESSOR

2. INTER COOLER

3. AFTER COOLER

4. SEPARATOR

5. ECEIVER TANK

6. AIR FILTER

7. REFRIGERATED AIR DRYER

8. OTHER PIPES WHERE CONDENSED WATER FORMED

Operating Principle

Installation 1

1. Install when the condensed water outlet is higher than drain trap.

1) Install Shut off Valve & Strainer first and install Trap lower area.

2) Use the valve sticked strainer which is easy to clean

3) Connect Outlet

4) Open the manual valve and check if the compressed air and condensed water is flowed.

Installation 2

2. Install when the condensed water outlet is lower than drain trap.

1) Install Shut off Valve & Strainer first and install Trap by using Inlet.

2) Connect Balance Line in the upper portion.If the Balance Line connection is difficult,install the valve and open slightly.

3) Connect Outlet

4) Open the manual valve and check if the compressed air and condensed water is flowed.

WRDT-500 Drawing / Spec.