Manufacturer of Sun Fuel, Disposable Butane Gas, Lacquer Spray, Industrial Aerosol Products
Packing Unit : Aerosol 420㎖/Can, 40cans/Box
Product information
ㆍDomestically first LEAD FREE(4 type heavy metals undetected) lacquer spray
ㆍSubstances hazardous to human body undetected (VOC Low) : Phthalate, heavy metals, etc.
ㆍOutstanding high gloss, continuous maintenance of colors
ㆍHeavy metals undetected (See test report)
Usage
ㆍSurface coloring: Metal, plastic, cement, furniture, ornament.
ㆍFor repair painting: Wood, steel structure.
How to use
1. Please remove dust, oil, rust, fungi, etc. on the coated face before spraying.
2. Sufficiently shake the container upon use.
3. Spray at a distance of 30~40cm.
4. Apply thin overlap coating for 2~3 times at an interval of 10 minutes in a parallel direction with the coated face as in the , rather than thick coating at one go.
5. When the contents remain after use, spray to allow only gas to come out for about 2 seconds by turning the container upside down, and properly cover the cap for storage.
※ Use after checking whether the color and the spray state are correct matching the use for the coated object prior to use.
※ Do not store inside a car or trunk during the summer season.
Precautions
ㆍSpray it after testing. (It can make negative effect depending on materials or properties of surface)
ㆍTo keep aerosol can unused for a long-time, hold it upside down and spray till no more liquid comes out to make a nozzle unblocked.
ㆍDo not keep it inside of vehicles.
ㆍKeep it away from children.
ㆍDo not use it for other purposes.
ㆍUse it outdoor or a well-ventilated place.
ㆍDo not spray directly onto the human body, animal, or food.
ㆍ As this is an inflammable product using high-pressure gas, keep the following cautions carefully.
ㆍDo not spray directly toward the open flame.
ㆍDo not use it near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
ㆍDo not use it in an environment where there are explosive or inflammable materials.
ㆍStore the product in places where the temperature does not exceed 40℃.
ㆍAfter used in enclosed areas, be sure to ventilate.
ㆍDo not throw into a fire.
ㆍAfter use, throw it away after checking and remove the remaining gas in the container.
ㆍDo not store it in an enclosed area.
ㆍBelow 5℃, injection power may be poor.