Manufacturer of Sun Fuel, Disposable Butane Gas, Lacquer Spray, Industrial Aerosol Products
Packing unit : Aerosol 200g/Can, 20cans/Box
Product information
YECOA YL-602 is a high-power dust remover which is used suitably for parts of electrical,electronic and measuring instruments.
ㆍExcellent stability in electrical insulation.
ㆍNo residues or condensates left after use.
ㆍContaminants swiftly and readily removed by high-pressure air.
Usage
ㆍPCB(Board), computer, IC, VTR, audio, cassette, CARD, communication equipment.
ㆍFacsimile, motorized typewriter, copier.
ㆍPrecision test equipment, hot-air blower, etc.
※ Upon spraying with shaking or laying it down for use, stains may be produced as the liquid phase is discharged.
How to use
ㆍAlways wear safety equipment before work.
ㆍUse it by standing the container upright.
ㆍConnect attached pipe if necessary.
ㆍSpray it about 20~30cm away from target object.
Precautions
ㆍDeclined spraying disperse liquid contained.
ㆍUse it by standing the container upright.
ㆍDo not keep it inside car in summer.
ㆍKeep in the place below 40℃.
ㆍKeep your children away from it.
ㆍContinuous spraying over five seconds cools the can, and decreases spraying pressure.
ㆍUse it in single-shot way.
ㆍLowered spraying pressure is not product trouble but caused when liquified gas takes surrounding heat during vaporization and cools down.
ㆍWhen product temperature gets normal, spraying works well.
※ Please observe the following points when storing and using the product and discard.
ㆍDo not use it toward the fire.
ㆍProvide good ventilation for long-time use.
ㆍDo not use near heater or stove.
ㆍDo not keep it in a place above 40℃.
ㆍProvide ventilation to use it in the closed room.
ㆍDo not throw it away into fire.
ㆍPunch the can to throw it away.
ㆍSpraying may not work well below 5℃.