HIGH-PERFORMANCE ALTERNATIVE TO OLDER MIL-DTL-5015 SOLDER TYPES
The Amphenol MS3450 MIL-DTL-5015 Rear-Release Threaded (Matrix®) series connectors use rear-release crimp contacts with a retention clip. These Amphenol MS3450 connectors fill the gap between older MIL-DTL-5015s and the environmental and higher-performance needs of new technologies. These MS3450 connectors are sealed to withstand moisture, condensation, vibration and flash-over. Over 165 contact layouts are available, in variations that allow for just power, just signal, or a mix of both contact types. These were formerly MIL-C-5015. For more detailed product information on MS3450 series connectors, please see the specifications below.
Get shopping! Mil spec part number prefixes include MS3450, MS3451, MS3452, MS3454, MS3456 and MS3459.
Features
Materials & Finishes
Electrical Data
Operating Voltage/Test Voltage
* Each insulator has a specific service rating. These numbers should be used by the designer only as a guide. The Service Ratings for each layout are listed on here.
† Not corrected for change in density resulting from variations in temperature.
MS connectors show no evidence of breakdown when the given test voltages are applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute, per MIL-STD-1344 Method 3001.
Current Rating & Contact Resistance
*Using non-military crimp Radsok contact
Maximum total current to be carried per connector in wire bundles as specified in MIL-W-5088. Contact resistance when tested to MIL-C-39029 will not exceed voltage drops listed in above table.
Mechanical
Operating Classes L, LS and KS -75°F to 392°F (-55°C to +200°C)
Temperature classes W and KT -75°F to 347°F (-55°C to 175°C)
Wire Sealing Range
Insulation Strip Length