product Image
Amphenol MS3450 Connectors (MIL-DTL-5015)
모델명
-
자료
Create part Number-Amphenol-Amphenol MS3450 Connectors (MIL-DTL-5015)
구매정보
provider logo
암페놀

Interconnect Product Manufacturer, Electrical, Electronic, Fiber Optic Connectors, Coaxial Cable and more

연락처
+1 203-265-8900
이메일
-
상품정보에 문제가 있나요?
정보수정 / 삭제요청
코머신은 제품 판매의 당사자가 아닙니다.
제조사
브랜드
-
SKU
141502
제품명
Amphenol MS3450 Connectors (MIL-DTL-5015)
모델명
-
사이즈
-
중량
-
제품 상세 정보

HIGH-PERFORMANCE ALTERNATIVE TO OLDER MIL-DTL-5015 SOLDER TYPES

The Amphenol MS3450 MIL-DTL-5015 Rear-Release Threaded (Matrix®) series connectors use rear-release crimp contacts with a retention clip. These Amphenol MS3450 connectors fill the gap between older MIL-DTL-5015s and the environmental and higher-performance needs of new technologies. These MS3450 connectors are sealed to withstand moisture, condensation, vibration and flash-over. Over 165 contact layouts are available, in variations that allow for just power, just signal, or a mix of both contact types. These were formerly MIL-C-5015. For more detailed product information on MS3450 series connectors, please see the specifications below.

Get shopping! Mil spec part number prefixes include MS3450, MS3451, MS3452, MS3454, MS3456 and MS3459.

 

 

Features

  • Broad Operating Temperatures
    The electroless nickel plating and stainless steel shell connectors will operate in temperature ranges from -67°F to 392°F (-55°C to 200°C). The cadmium olive drab plating connectors will operate in temperatures ranging from -75°F to +347°F (-55°C to 175°C).
  • Environmental
    These connectors will perform in the full range of operating conditions defined in MIL-DTL-5015 and are recommended for conditions where vibration, moisture, pressure, and/or temperatures are extreme.
  • Rugged Shell
    The rugged aluminum alloy or stainless steel shells are highly resistant to damage and corrosion with firewall capabilities. Shells are available in four different styles, like a self-locking coupling nut in seventeen different sizes.
  • Wide Range of Wire Gauges and Current-Carrying Capacity
    Up to 150/245 amps for standard military contacts and wire gauges from size 20 to size 0 AWG.

 

 

Materials & Finishes

Shell
Aluminum alloy, stainless steel
 
Shell Plating
Cadmium, Anodized, Electroless Nickel, Zinc Alloy, or Passivated
 
Contacts
Copper alloy
 
Contact Plating
Silver or Gold
 
Insulator
Neoprene
 
Seals
Silicone

 

 

Electrical Data

Operating Voltage/Test Voltage

* Each insulator has a specific service rating. These numbers should be used by the designer only as a guide. The Service Ratings for each layout are listed on here.

† Not corrected for change in density resulting from variations in temperature.

MS connectors show no evidence of breakdown when the given test voltages are applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute, per MIL-STD-1344 Method 3001.

 

Current Rating & Contact Resistance

*Using non-military crimp Radsok contact

Maximum total current to be carried per connector in wire bundles as specified in MIL-W-5088. Contact resistance when tested to MIL-C-39029 will not exceed voltage drops listed in above table.

Wire Range Sizes
20 AWG - 0 AWG
 
Insulation Resistance
50,000 megohms minimum at 77°F (25°C)
1,000 megohm minimum at 392°F (200°C) Class L and
347°F (175°C) Class W

 

 

Mechanical

Operating  Classes L, LS and KS -75°F to 392°F (-55°C to +200°C)
                    Temperature classes W and KT -75°F to 347°F (-55°C to 175°C)

 

Wire Sealing Range

 

Insulation Strip Length

Mating Life
100 cycles minimum
 
Salt Spray
Class L & W 48 hours unmated; 48 hours mated per MIL-STD-1344 method 1001 condition letter A, paragraph 4.6.13.2 of MIL-DTL-5015, Class LS, KT, KS 952 hours mated, 48 hours unmated per MIL-STD-1344, method 1001 condition letter D, paragraph 4.6.13.3 of MIL-DTL-5015
 
Heat
Class L, LS & KS, +392°F (+200°C); Class W, KT, +347°F (+175°C)
 
Chemical Resistance
20-hour full-immersion unmated in hydraulic fluid and lubricating oil per MIL-DTL-5015 minimum
 
Vibration
10 to 2,000Hz (10g’s) 10 microseconds maximum discontinuity to MIL-STD-1344 Method 2005, condition II per MIL-DTL-5015
 
Shock
50g 11-millisecond duration, three major axes. 10 microseconds maximum discontinuity to MIL-DTL-5015 per MIL-STD-1344 method 2004, condition A, 3.13.
 
Contact Type
Rear-release crimp
 
Number of Circuits
1 to 85
 
Contact Insertion & Extraction
Insertion from rear of connector with simple plastic or high-quality metal hand tool. Extraction from rear with plastic or high-quality metal hand tools.
 
Contact Retention
Per MIL-DTL-5015, 3.10 & 4.6.6.

 

Polarization
Integral key and keyway plus optional rotational polarization.
 
Approvals
MIL-DTL-5015 (MIL-C-5015)

 

 

암페놀
Interconnect Product Manufacturer, Electrical, Electronic, Fiber Optic Connectors, Coaxial Cable and more
세계적로 사람들을 기술과 연결하는 비전 암페놀(Amphenol)은 세계에서 가장 큰 인터커넥트 제품 제조업체 중 하나입니다. 이 회사는 전기, 전자 및 광섬유 커넥터, 동축 및 평평한 리본 케이블, 그리고 인터커넥트 시스템을 디자인, 제조 및 마케팅합니다. 회사의 제품 주요 사용 분야는 케이블 텔레비전, 휴대전화 및 데이터 통신 및 정보 처리 시스템을 포함한 통신 및 정보 처리 시장, 항공우주 및 군용 전자 제품, 그리고 자동차, 철도 및 기타 교통 및 산업용 애플리케이션입니다.
문의하기