TOP
HIGH RELIABILITY AND EMI-SHIELDING IN EXTREME ENVIRONMENTS
Amphenol‘s TV-CTV Tri-Start MIL-DTL-38999 Series III connectors have high-density contact arrangements in a miniature circular shell. Originally designed for the high-performance requirements of military and commercial aircraft, these circular connectors are perfect for applications requiring extremely reliable interconnections. Amphenol TV-CTV connectors are quick-mating and environmentally-sealed. See our full list of product features for Amphenol TV-CTV Tri-Start connectors in the specifications below.
Features
Materials & Finishes
Shell & Plating
Electrical Data
Contact Sizes 22D, 20, 16 and 12
Test Voltage (unmated condition)
Operating Voltage
Current Rating by Contact Size & Wire Accommodation (Test Amps)
Contact Resistance of Mated Contacts End-to-End
Mechanical
Wire Sealing Range
Insulation Strip Length
All dimensions in inches (millimeters in parentheses)
Cross-Section
EXCERPT FROM MIL-DTL-38999K
3.43.2 JAN brand. The United States Government has adopted, and is exercising legitimate control over the certification marks “JAN” and “J”, respectively, to indicate that items so marked or identified are manufactured to, and meet all the requirements of military specification. Accordingly, items acquired to, and meeting all of the criteria specified herein and in applicable specifications shall bear the certification mark “JAN” except that items too small to bear the certification mark “JAN” shall bear the letter “J”. The “JAN” or “J” shall be placed immediately before the PIN except that if such location would place a hardship on the manufacturer in connection with such marking, the “JAN” or “J” may be located on the first line above or below the PIN. Items furnished under contracts or orders which either permit or require deviation from the conditions or requirements specified herein or in applicable specifications shall not bear “JAN” or “J”. In the event an item fails to meet the requirements of this specification and the applicable specification sheets or associated detail specifications, the manufacturer shall remove the “JAN” or the “J” from the sample tested and also from all items represented by the sample. The “JAN” or “J” certification mark shall not be used on products acquired to contractor drawings or specification. The United States Government has obtained Certificate of Registration No. 504,860 for the certification mark “JAN”.
Note: The “JAN” or “J” is not part of the PIN but indicates a certification.