MINIATURIZATION AND HIGH SPEED IN THE HARSHEST ENVIRONMENTS

Amphenol µCom-10Gb+ series (pronounced, Microcom) is designed to meet industry demands for miniaturized connectors with rapid transmission speeds and high resistance in extreme environments. Environmentally tested to MIL-DTL-38999 Series III military specifications, these miniature connectors with a 15mm (.59˝) max. external diameter can exceed 10Gb/s per IEEE 802.3an-2006 even in the harshest environments. A 2000 mating cycle coupling provides end users with one of the most rugged and micro sized interconnect solutions on the market.

Features and Benefits

• 500h salt spray RoHS compliant plating
• Solder, crimp and PCB contact styles
• IP68 sealing for mated/unmated receptacles
• Temperature range: -55ºC/ +125ºC
• Available in threaded and push pull style plugs

The rugged IP68 design features four completely insulated twisted wire pairs throughout the connector to minimize cross-talk. A threaded coupling mechanism provides high vibration resistance. The design provides IP68 sealing for mated and unmated receptacles with 500 hours of salt spray resistance.

Features

• 10Gb+ exceeds 10Gb/s Ethernet following IEEE 802.3an-2006 : 10GBase-T
• CAT.6A connector according to TIA568C.2 and ISO/IEC11801 standard
• Environmental testing based on MIL-DTL-38999 series III military specifications
• Miniature : 15 mm(.59") max external diameter
• 4 pairs totally insulated throughout the connector
  minimum cross-talk between the four pairs
• Patent pending special interfacial shapes
  minimum perturbation at the interface of each pair
• Thread coupling mechanism
  2000 mating cycles & high vibration resistance
• IP68 sealing mated and unmated for PCB receptacles

Materials & Finishes

Electrical Data

Mechanical

Cable Used for cordsets CAT 7 HFFR according to EN 50288-4-2

• Stranded bare copper wire (26 AWG)
• 4 screened twisted pairs: 2 wires twisted to a pair, Aluminate foil overlapped
• Shield braiding of tinned copper wires, about 80% coverage
• Strain member of Kevlar
• Jacket in black Polyurethane (PUR), glossy finish, acc to DIN VDE 0282
• External diameter 7.0 +/-0.3 mm
• UV & Hydrolysis resistant, Halogen free, RoHS compliant
• Max Pull force: 800 N, Weight : about 54 kg/km
• Temperature : - 40°C to + 85°C (- 40°F to + 185°F)
• Min. bending radius allowed: repeated 8 x 0, single 4 x 0