product Image
모델명
NK5051 Series
시리즈
도어클로저
자료
-
구매정보
provider logo
아사아블로이코리아삼화정밀(주)

도어클로저, 도어체크, 플로어힌지, 자동폐쇄장치 전문업체, 방화용 제품 생산

연락처
031-412-0100
이메일
webmaster@kingdoorcloser.com
상품정보에 문제가 있나요?
정보수정 / 삭제요청
코머신은 제품 판매의 당사자가 아닙니다.
제조사
아사아블로이코리아삼화정밀(주)[바로가기]
브랜드
-
SKU
49249
제품명
-
모델명
NK5051 Series
사이즈
-
중량
-
제품 상세 정보

Features

ㆍ Cast Iron Body
ㆍ Rack-and-pinion design
ㆍ Non-handed
ㆍ Adjustable Power: BF-6
ㆍ Built-in Back check
ㆍ Forged steel arm
ㆍ Independent latch, sweep, and back-check

 

Optional Features

ㆍ Delayed action
ㆍ Metal cover (Handed)
ㆍ Option Arm: CUSH / HCUSH / EDA / HEDA

 

COMPLIANCE STANDARD

ㆍ ANSI/BHMA A156.4, Grade1 certified
ㆍ UL listed
ㆍ ADA compliant (BF-6)

 

Cross Reference

Company CAL ROYAL DORMA DOR-O-MATIC HAGER K2 LCN NORTON PDQ SARGENT
Model 801S 8616 SC80 5200 D-3550 1460 8301 5300 1430

 

STANDARD FEATURES

ㆍCast Iron Body

Closer bodies are constructed of high grade cast iron that can stand up to the constant use and abuse.

ㆍRack & Pinion Operation

Provides a smooth constant control of the door through its full opening and closing cycle. 180�.door swing can be achieved when door, frame, hardware and arm function do not interfere

ㆍNon-handed

With few exceptions all NK5051 Series door closers are non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions.

ㆍSweep Speed Control Valve

Allows adjustment of door speed from the door’s full open position down to approximately 10˚ from the closed position.

ㆍLatch Speed Control Valve

Allows adjustment of door speed from approximately 10˚ down to the door's fully closed position.

ㆍTri-Packed

NK5051 Series come with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations

ㆍAdjustable Back-check Valve

Provides control of the door in the opening cycle, beginning at approximately 75˚ of door opening. it cushions the door opening when the door is forcibly opened beyond its pre-adjusted limits.

ㆍMolded Cover

Molded high impact material. These covers are non-handed for all applications.

ㆍMulti-Sized Door Closer

Adjustable through the power range of sizes BF - 6.
NK5051 (BF-6) also confirms to the BF opening force requirements of the A.D.A and ANSI/BHMA standard A117.1 for interior doors.

COMPLIANCE

ㆍ ANSI/BMHA A156.4, Grade 1 certified
ㆍ UL /cUL listed
ㆍ UL10C listed for positive pressure fire test
ㆍ NK5051 (BF-6) model is designed to comply with requirements for the Americans with Disability Act (A.D.A) and ANSI standard A117.1

 

DELAYED ACTION

ㆍAdjustable Delayed Action Closing

An optional hydraulic feature that add a third speed range to closing cycle. This feature becomes effective when the door is opened and released at any point beyond 70˚. The amount of time delay depends upon the combination of the angle of door released and valve adjustment. The valve can be adjusted with 4mm hex key from no delay time up to maximum delay times of :

Door opened Approximate Time of Delay Cycle
180˚ 4~5 minutes
120˚ 2~3 minutes
90˚ 25~30 seconds

 

Sam Hwa Precision  NK5051 Series

ㆍPressure Relief Safety Valve

The delayed action hydraulic system contains a pressure relief valve. Any time the door is forced toward the closed direction while it is in the closing cycle, the valve will open and permit the door to close. This prevents damage to door, frame and closer.

ㆍSuggested Application

Delayed action closing allows slow-moving traffic to clear the opening before the door closer's normal closing cycle begins. This feature can be helpful in health care facilities such as hospitals and nursing homes. It provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of closing. At the same time, it can accommodate the facility's staff with movement of food service carts, bed, and other wheeled traffic.
Use of delayed action closers on many doors throughout industrial and commercial buildings can also assist the flow of traffic. Locations where additional time to clear the opening is advantageous are doors between office, doors to workshops or laboratories, kitchens and food processing area.

ㆍNon-Hold Open

Self-closes door every time door is opened.
Auxiliary stop (by others) required.

Model Adjustable spring sizes Weight of Door (Kg)
Non-Hold Open Hold Open
NK5051 With optional Hold open arm 1 ~ 6 15~120
NK5051BF BF-4 10-85

ㆍHold Open

Achieved by means of friction or ball and detent / roller. Friction hold open has a range of 90˚ to 180˚ using a template location and mechanical adjustment.
Hold open arm door closers are not permitted to be use on fire door assemblies.

Sam Hwa Precision  NK5051 Series 1

아사아블로이코리아삼화정밀(주)
도어클로저, 도어체크, 플로어힌지, 자동폐쇄장치 전문업체, 방화용 제품 생산
당사는 최고의 기술력과 품질을 바탕으로 도어클로저, 플로어힌지 및 자동폐쇄장치 등 도어 하드웨어를 생산 및 판매하는 한국을 대표하는 선두 기업입니다. 1984년 창사 이래 오직 도어 하드웨어 사업에만 매진하여 지속적으로 끊임없는 성장을 해왔으며 2010년 스웨덴에 본사를 둔 글로벌 기업인 ASSA ABLOY 와 한가족이 되어 국내 최고의 선두주자에서 세계시장으로 뻗어 나가는 기업으로 도약하기 위해 인재와 기술을 바탕으로 편리하고 실용적인 제품을 만들기 위해 노력하고 있습니다. 항상 고객의 눈높이에서 고객의 가치를 최우선적으로 실현할 수 있는 제품을 만들기 위해 끊임없는 기술 개발과 최상의 품질 구현에 정진할 것이며 이를 위해 지속적인 투자와 노력을 아끼지 않을 것입니다. 앞으로도 고객에게 만족을 주는데 머무르지 않고, 고객의 미래 가치를 창출하고 선도해 나가는 기업이 되도록 항상 노력하고 최선을 다하겠습니다.
문의하기