매그스위치, 자석제품, 조선용 치공구, 면취기, 푸셔, 매그드릴, 중량물 리프팅 솔루션
NVC-L
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.5 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3.3 |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| 0-50 | 52 | 4 | 32 | 166 | 27 | 50 | 120 | 378 | 50 | 14 | 30 | 54 | 6.4 | |
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
| No. | ASS’Y NAME | No. | PART NAME | No. | ASS’Y NAME | No. | PART NAME |
|---|---|---|---|---|---|---|---|
| 1 | BODY | - | - | 6 | JAW ASS’Y | 6-1 | SWIVEL JAW |
| 2 | SHACKLE | - | - | 6-2 | BOLT & NUT | ||
| 3 | SHACKLE PIN | - | - | 7 | LATCH ASS’ | 7-1 | SAFETY LATCH |
| 4 | CAM ASS’ | 4-1 | CAM | 7-2 | HANDLE RING | ||
| 4-2 | LINK | 7-3 | SPRING PIN | ||||
| 4-3 | SPRING PIN | 7-4 | BOLT & NUT | ||||
| 4-4 | RIVET PIN | 8 | LOCK SPRING | - | - | ||
| 5 | CAM PIN ASS’ | 5-1 | CAM PIN | ||||
| 5-2 | SPRING PIN |
Features
- Due to the safety lever, the NVC-L is convenient to use and also easy to separate the clamp after working with thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.
How to use
- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Ensure that during the operation, the lever does not collide with other objects since the safety lever is attached to the exterior of
hte clamp.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
the safety lever.
- When lifting a work piece, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator.
