TOP
NGC-H
1 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3.3 |
2 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3.3 |
3 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3.3 |
3 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3.3 |
3 | 0-20 | 22 | 4 | 28 | 102 | 22 | 32 | 88 | 265 | 45 | 10 | 28 | 56 | 3 |
No. | ASS’Y NAME | No. | PART NAME | No. | ASS’Y NAME | No. | PART NAME |
---|---|---|---|---|---|---|---|
1 | BODY | - | - | 5 | CAM PIN ASS’Y | 5-1 | CAM PIN |
2 | SHACKLE ASS’Y | 2-1 | SHACKLE | 5-2 | SPRING PIN | ||
2-2 | L-LINK | 6 | JAW ASS’Y | 6-1 | SWIVEL JAW | ||
2-3 | RIVET PIN | 6-2 | BOLT & NUT | ||||
3 | BODY PIN ASS’Y | 3-1 | BODY PIN | 7 | LATCH ASS’Y | 7-1 | SAFETY LATCH |
3-2 | SPRING PIN | 7-2 | HANDLE RING | ||||
4 | CAM ASS’Y | 4-1 | CAM | 7-3 | SPRING PIN | ||
4-2 | LINK | 7-4 | BOLT & NUT | ||||
4-3 | SPRING PIN | 8 | LOCK SPRING | - | - | ||
4-4 | LINK PIN |
Features
- Due to the safety lever, the NVC-L is convenient to use and also easy to separate the clamp after working with thick steel plates.
- After releasing the lever, the link stops functioning even if the shackle is lifted. Therefore, it is easy to do the biting and releasing work.
How to use
- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Ensure that during the operation, the lever does not collide with other objects since the safety lever is attached to the exterior of
hte clamp.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
the safety lever.
- When lifting a work piece, a signal man must be outside the rotation radius of a work piece to send a signal to a crane operator.