TM-E70
The Talc Master is a device used to evenly spread talc to facilitate separation of the outer sheath from inner sheath when you peel of the sheath of wire.
The Talc Master is used before extrusion to spray Talc Powder to the Cable.
The Dosing Jet Control function allows you to adjust the amount of spray in accordance with the line speed.
The two level rider injector and the injection nozzle are used to pour out talc.
To prevent the powder from scattering, a two level circulation filter is used for filtering.
Supply
Talc Supply is an air device which is designed to supply talc powder to your equipment and prevent scattering of talc that is supplied.
After being filled with the powder, this portable device can be moved and supply the powder to the Talc Master.
Product Specs
| MODEL | TM-E150P | TM-E70 |
| Type | Electrostatic powder application | |
| Wire size(mm) | 150mm Flat | Max. 70 |
| Fault alarm | Blower,electrostatic,powder low | |
| Talc powder control | Dosage controller | |
| Center high | 950 ~ 1150mm | |
| Compressor air supply | 4kgf/㎠ | |
| Scattering check equip | Ring blower | |
| Heater | 1.5KW Plate heater | |
| Size | 800X1850X850 | 800X1850X1200 |
| Static electricity valtage | 0~ 50/90KVDC | |
| Power supply | 220VAC 50/60Hz 1Phase 3KW | |
