Service intended
P753S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.
Special features |
3-A certificated Suitable for SIP and CIP All stainless steel and welded construction |
Nominal diameter |
63 and 100 mm |
Accuracy |
±1.6 % of full scale If scale range less than 100 psi : ±2.0% of full scale |
Scale range |
0 ~ 3.5 MPa, single |
Working pressure |
Steady pressure : 75 % of full scale value Fluctuating pressure : 67 % of full scale value |
Operating temperature |
Ambient : -20 ~ 65 °C Fluid : Max. 121 °C |
Temperature effect |
Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
Process connection |
DIN Round thread 28-8 |
Case and cover |
Stainless steel (304SS) Electropolished with pressure relief |
Window |
Safety glass |
Movement |
Stainless steel |
Dial |
White aluminium, with pointer stop pin With black/red lettering, dual pressure scale |
Pointer |
Black painted aluminium alloy |
Helium leak rate |
Tested to confirm leakage rates of less than 10-8 mbar •ℓ/sec |
System filling |
Food grade oil (FDA certified) |
O-ring |
Supplied by FDA approved Supplier (Viton) |
Option |
Material of wetted parts : Electropolished 316L SS |
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.