Ultra high purity pressure gauge (EP grade)_P820 series (316L type double melt)
Service intended
P820 series are specially designed for the ultra-high purity gas distribution system used in a semiconductor, electronic, medical, biotechnology and pharmaceutical industry.
| Nominal diameter |
50 (2") and 63 mm (2½") |
| Accuracy |
Grade A (ASME B40.1) : 50 (2") and 63 mm (2½")
Grade B (ASME B40.1) : 50 (2") and 63 mm (2½") |
| Scale range |
-0.1 ~ 0 to 0 ~ 28 MPa |
| Working pressure |
Steady pressure : 75 % of full scale value
Fluctuating pressure : 67 % of full scale value |
| Working temperature |
Ambient : -40 ~ 65 °C
Fluid : Max. 100 °C |
| Temperature effect |
Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale |
Standard features
| Pressure connection |
Type 316L SS double melt electropolished low mount or center back mount
surface finish Ra≤0.25㎛
■ ¼" NPT male thread
■ VCR® male or female face seal fitting |
| Element |
Type 316L SS
<6 MPa : C-type bourdon tube
≥6 MPa : Helical type bourdon tube |
| Case |
Type 304SS, Electropolished with pressure relief |
| Cover and window |
Twist-lock polycarbonate |
| Movement |
Stainless steel |
| Dial |
White aluminium with pointer stop pin
With black/red lettering, dual pressure scale (bar/psi) |
| Pointer |
Black painted aluminium alloy |
| Helium leak rate |
Tested to confirm leakage rates of less than
10 mbar • ℓ/sec |
| Certificates |
ATEX Ex II GD c IIC TX |
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
