AL Welding material manufacturer, brazing additives, brazing filler metal, brazing materials and machine
Functional additives
Due to the nature of aluminum, most of the brazing process uses double the flux concentration (high concentration, low concentration) When using this functional additive, it is possible to braze with flux of single concentration
Brazing characteristics are improved even when used at a lower concentration than the conventional flux, and the defective connection ratio is also reduced.
In addition, the amount of residue is reduced by reducing the flux concentration.
Usage of functional additives
- Process improvement (Flux single concentration design) If necessary
- If the gap between parts is large (≤ 0.2 mm) and you want to reduce the defect rate
- When it is required to have excellent bonding strength or to increase the fillet formation rate
Properties of functional additives
- Improve the Brazing characteristic by improving the efficiency of Aluminum Flux
- Aluminum Flux without mixing with chemical reaction
- Brazing property is improved greatly by using small amount
- Low residue of Aluminum Flux after brazing due to single concentration flux
(Significant effect when used with our Flux additive)
- Easy to manage Flux concentration
- Improvement of Brazing Characteristics of Magnesium Added Materials
Packing and specifications
◊ 950 ml Bottle / 1 KG
◊ 4 Liter Basket / 4 KG
◊ 20 Liter Basket / 20 KG
SPECIFICATION
Properties | Appearance | Oder | pH | Melting Temp. (℃) | Base | Viscosity (mPas) |
HAOM-100 | Milky White | No | 6.5 ± 0.5 | 565 ~ 580 | Water | 500 ~ 1,000 |
HAOM-200 | Milky White | No | 6.5 ± 0.5 | 565 ~ 580 | Water | 500 ~ 1,000 |
HAOM-100CS20 | Milky White | No | 6.5 ± 0.5 | 420 ~ 580 | Water | 500 ~ 1,000 |
