Centrifugal separator manufacturer, Filter device, Cleaning machine, Honning machine, Wrapping machine and more
Product features
- Operation to the removal of the sludge is an automatic process. Manual operation is not required.
- It will be able to clean an amount of sludge with reverse direction drive of rotor and scraper.
Structures
Processing cycle | |
- Process Liquid continuously flows up through the Feed Tube. - The Impeller accelerated and distributes the Liquid into the Spinning Bowl. - Liquid flows up The Pool Surface of the Bowl as the solids separate and compact at the Perimeter of the Bowl. - The Clean Liquid passes around the Efficiency Ring and discharges through the Bowl Hub discharge ports and into the Frame Collection Chamber. - The clarified liquid flows down the Drain Tubes and into the lower frame drain pan where it exists discharge fitting at the rear of the Centrifugal Separator. |
|
Automatic cleaning cycle | |
- Once the bowl fills capacity with waste solids,The Automatic cleaning Cycle is activated to remove the Solids. This Cycle is controlled by an adjustable Process Timer. - When the cleaning cycle is activated, The Separator shuts off The Feed and brakes to a complete Stop. - After the Free Liquid drains, The Sludge chute cover is pneumatically opened. - A second Pneumatic Cylinder engages the plow mechanism’s clutch socket into the plow shaft. The sprocket then turns, counter rotating plow blades altermately, clockwise and counter clockwise. - The Plowing Action discharges the compacted solids from the tapered Section of the Separator Bowl. The sludge drops through a chute into a waste receptacle below The Machine. - Upon completion of the cleaning cycle, the sludge chute cover closes,the pneumatic cylinder retracts,The Process Timer resets,and the machine resumes its process cycle. A normal cleaning cycle takes less than 5 minutes. |
Specifications
Model\Spec. | Process capacity (ℓ/min) |
Sludge volumn (ℓ) |
RPM of bowl(rpm) |
Motor (Kw) |
Required space (mm) |
Inlet height (mm) |
Outlet height (mm) |
Weight (Kgf) |
|
---|---|---|---|---|---|---|---|---|---|
50Hz | 60Hz | ||||||||
PSF-100A | 100 | 15 | 1800 | 2200 | 3.7 | 650 x 1,350 x 2,000 | 1450 | 968 | 500 |
PSF-200A | 200 | 25 | 1800 | 2200 | 5.5 | 760 x 1,530 x 2,150 | 1574 | 1030 | 800 |
PSF-400A | 400 | 40 | 1800 | 2200 | 11 | 850 x 1,700 x 2,450 | 2154 | 1044 | 1000 |