Index drive manufacturer, Shaft, Flange, Table type
CF2 NC ROTARY TABLE
Overview & Features
DRC(Daedong Rotary Table for CNC) is a motion control unit using servo system. With the Zero-Backlash Cam Technology based control, the unit provides high-quality and reliability. A motion control device using servo system is a key to the performance of automated system equipment.
Although the specifications and performance of the device are good for ideal movements, problems of the driving control part, such as backlash, poor hardness, and instable control, cause abnormal operation of the output part and impede ideal performance.
DRC is a motion control unit not only to obtain strong torque, hardness, and stability in the way of reducing the speed of a servo motor mechanically, but to get zero-backlash output operation with the use of a preload device.
Simple basic structure
This motion control unit consists of Cam and Cam Follower and uses a servo motor.
High speed
The stylish cam curve, precision-processed cam and cam follower, and complete removal of backlash make possible fast operation
High precision
Fast correction time and precise location control; a small change in operating speed and a response to precise synchronization; there is almost no need of maintenance so that it is possible to save the life cycle cost of an automated system.
Zero backlash
In the roller gear cam of input shaft, Taper Rib is preloaded and contacts cam follower to remove backlash completely.
Product Code
No. | Category | Code | Description |
a | Model | DRC | Rotary table |
b | size | 170 | Size of ratary table Basic table diameter: 170mm (Attention: see the drawing for the actual size.) |
c | Gear ratio | 60 | FA : FANUC MI : MITSUBISHI OK : OKUMA LS : LSIS |
e | Attachment position | 2 | 1 : Horizontal 2 : Vertical |
f | Motor installation direction | R | |
g | Processing surface of connector attachment hole | R | |
h | Table shape | 1 | |
i | Specially ordered specifications | X | If there are specially orders specifications, write ‘X’. ※ Please attach the contents of special specifications separately. |
Table of Properties
DRC 170
| Items | Figure | Unit | Items | Figure | Unit | |
| Table diameter | 184 | ㎜ | Allowable load weight | Thrust | 160 | ㎏ |
| Center height | 140 | ㎜ | Radial | 80 | ㎏ | |
| Table internal diameter | 40H7 | ㎜ | Allowable load | Continuous torque | 17.14 | kgf·m |
| Block reference block width | 18H7 | ㎜ | Max. torque | 29.29 | kgf·m | |
| Reduction gear ratio (Gear ratio) | 60 | Bending moment | 55.51 | kgf·m | ||
| Table max. rotation no. | 50 | rpm | Max. inertia moment (GD2) (GD2) | 0.51 | kgf·㎡ | |
| Indexing precision | ±10 | arc.sec | Product weight (Net weight) | 약 45 | kg | |
DRC 200
| Items | Figure | Unit | Items | Figure | Unit | |
| Table diameter | 200 | ㎜ | Allowable load weight | Thrust | 200 | ㎏ |
| Center height | 170 | ㎜ | Radial | 100 | ㎏ | |
| Table internal diameter | 45H7 | ㎜ | Allowable load하 | Continuous torque | 29.18 | kgf·m |
| Block reference block width | 18H7 | ㎜ | Max. torque | 53.47 | kgf·m | |
| Reduction gear ratio (Gear ratio) | 60 | Bending moment | 87.36 | kgf·m | ||
| Table max. rotation no | 50 | rpm | Max. inertia moment (GD2) (GD2) | 1.00 | kgf·㎡ | |
| Indexing precision | ±10 | arc.sec | Product weight (Net weight) | 약 65 | kg | |
DRC 250
| Items | Figure | Unit | Items | Figure | Unit | |
| Table diameter | 243 | ㎜ | Allowable load weight | Thrust | 250 | ㎏ |
| Center height | 185 | ㎜ | Radial | 120 | ㎏ | |
| Table internal diameter | 105H7 | ㎜ | Allowable load | Continuous torque | 53.88 | kgf·m |
| Block reference block width | 18H7 | ㎜ | Max. torque | 102.35 | kgf·m | |
| Reduction gear ratio (Gear ratio) | 60 | Bending moment | 225.51 | kgf·m | ||
| Table max. rotation no. | 50 | rpm | Max. inertia moment (GD2) (GD2) | 2 | kgf·㎡ | |
| Indexing precision | ±10 | arc.sec | Product weight (Net weight) | 170 | kg | |
DRC 320
| Items | Figure | Unit | Items | Figure | Unit | |
| Table diameter | 310 | ㎜ | Allowable load weight | Thrust | 350 | ㎏ |
| Center height | 225 | ㎜ | Radial | 180 | ㎏ | |
| Table internal diameter | 130H7 | ㎜ | Allowable load | Continuous torque | 78.37 | kgf·m |
| Block reference block width | 18H7 | ㎜ | Max. torque | 151.12 | kgf·m | |
| Reduction gear ratio (Gear ratio) | 60 | Bending moment | 362.24 | kgf·m | ||
| Table max. rotation no. | 50 | rpm | Max. inertia moment (GD2) (GD2) | 45 | kgf·㎡ | |
| Indexing precision | ±10 | arc.sec | Product weight (Net weight) | 270 | kg | |
