Index drive manufacturer, Shaft, Flange, Table type
Overview & Features
Cam Curve
In accordance with the use purpose it can be used the following three types of curves.
1) Modified Trapezoid Curve (High speed, light weight)
2) Modified Sine Curve (middleㆍHigh speed, light weight)
3) Modified Constant Velocity Curve (High speed, light weight)
lifespan
Oil change alone can be obtained using standard than 10,000 hour lifetime.
Install
Front (page 6) and is designed to be used.
Globoidal Cam-roller gear cam
The three-dimensional shaping the cam shaft assembly.
Cam Follower
It is made high so as to forward movement of the output shaft portion are designed to better withstand a high load.
Turret
That the cam follower assembly with a radial part affecting halchul degree
| No | Category | Code | Description |
| a | Model | CF4 | Roller Gear IndexDrive |
| b | Size | 110 | Index drive size. Display the axis-to-axis distance between input and output size 110mm |
| c | Type | T | Display the Type of the index drive T: Table Type |
| d | Stop number | 04 | One display output shaft revolution jeongjisu, be quartered |
| e | index angle | 270 | One output shaft (1 Stop) of the input shaft rotation required for each halchul |
| f | Cam curve | 2 | 1 : Modified Trapezoid MT 2 : Modified Sine MS 3 : Deformation rate MCV 4 : Other curves DMS |
| g | Input / Output direction of rotation | R | It refers to the direction of rotation of the output shaft to the input shaft rotation direction
|
| h | DWEL | 1 | Displays the number DWELL. (1, 2, 3, 4 DWELL) |
| i | Specifications input shaft | X | Reducer mounting position and direction indicators display of the input shaft
|
| j | Specifications output shaft | S | It displays the output shaft types. S : Standard, L : Torque limiter mounted, X : Special Shaft |
| k | Mounting position | S |
|
| l | Mounting Hole plane | VW | Specifying Mounting Hole plane for the mounting of the drive index (drawing Resources) Mounting holes Mounting holes drilled on the two sides of VW as standard R, when S, T, U TAP surface mounting is required, demand additional writing |
| m | Special specification | X | pecial specifications. If a standard other special order specification writing the X, gave separately attached the contents of special specifications, indicate the dimensions and tolerances change, Specials cam curve and installments each, Specials halchul level, oil level and drain change or specify such. |
