TOP
Manufacturer of Optical Spectrometers, Camera Systems for OEM Industrial Applications
Multichannel Grating Spectrometer
Horiba’s OEM Polispectra Quad spectrometer is an integration of four VS70 spectrometers built around Horiba JY Type-IV flat-field aberration-corrected holographic concave gratings. This high throughput VIS spectrometer with 4 fiber inputs provides simultaneous acquisition of 4 channels at high speed with minimal crosstalk. The main electronics board is designed to read the two CCDs on the system simultaneously and provides 1-8X binning capability. This OEM system is a unique and innovative approach to drastically reduce the cost per channel.
For OEM Industrial Low-light Applications
ㆍ Fluorescence
ㆍ Emission (OES)
ㆍ Absorbance
ㆍ Reflectance
ㆍ Examples :
- Body Fluids Analysis
- Flow Cytometry
- LED Testing, Colorimetry
- Food Analysis Moisture Content
ㆍ Simultaneous acquisition of 4 channels
ㆍ Excellent light purity with a typical 0.05% channel to channel crosstalk
ㆍ Spectral acquisition time as low as 1.3 ms for all 4 channels
ㆍ High throughput (f/2.3)
ㆍ Ultra-low stray light with aberration correction holographic grating
ㆍ High SNR and dynamic range
ㆍ TTL in/out to trigger each and all channels
ㆍ Compact size, robustness, stability and affordability
CCD Quantum Efficiency
Simultaneous measurement of 4 colors LED array spectra with Polispectra Quad spectrometer
Polispectra Quad Spectrometer is capable of simultaneously measuring 4 channels, the picture above shows the emission spectra of 4 different color LEDs measured using Ø 200 µm core fibers
Raw Throughput Uniformity
Raw throughput uniformity of better than 75% for 1000 production units measured channel to channel
OEM Spectrometer Selection Guide
| General Spectrometer Specifications* | |
|---|---|
|
Spectral Coverage |
Tunable from 470 to 730 nm |
|
Spectrometer Input |
FC (standard), other input types available upon request |
|
Spectral Resolution |
2.7 nm with 75 µm slit; 5 nm for Ø 200 µm fiber (no slit) |
|
Average Spectral Dispersion |
23.56 nm/mm; 0.33 nm/pixel (14 µm pixel CCD detector) |
|
Crosstalk (channel to channel) |
< 0.05% (typical)+ < 0.1% (maximum) |
|
Focal Length |
70 mm |
|
F/# |
~ F/2.3 |
|
Stray Light Rejection (< 590 nm or > 680 nm) |
< 0.05 % (typical) |
|
Wavelength Accuracy |
< 0.25 nm (average between 500 nm and 710 nm) |
|
Software |
LabVIEW™ acquisition software for initial evaluation (DLLs provided for software integration) |
| Back-illuminated linear CCD Detector | ||
|---|---|---|
| CCD Detector Model | Hamamatsu S11071-1104N | |
| CCD Sensor Format | 2048 x 22 (2 spectra per CCD of about 1000 pixels each) | |
| CCD Pixel Size | 14 x 14 µm | |
| CCD Height | 0.3 mm | |
| CCD QE at 20° C | QE = 63% at 250 nm; 76% at 650 nm; 55% at 850 nm | |
| Scan Rates | 2 MHz | |
| Full Well Capacity | > 225,000 e¯/pixel (minimum); 250,000 e¯/pixel (typical) | |
| Communication | USB 2 | |
| Scan Rates | 45 kHz and 500 kHz | |
| Readout Noise | 23 e¯ (typical) to 35 e¯ (maximum) | |
| Maximum Spectral Rate | 720 spectra/s with 0 ms exposure time | |
| Digitization | 16-bit ADC | |
| Dynamic Range (typical for single pixel) |
11,000:1 (typical) 7,300:1 (minimum) |
|
| Non-linearity (measured on each system) |
<0.8% (typical) 1.5% (maximum) |
|
| Dark Current at –45° C Note: Pixel Size = 14 μm |
50 e¯/pixel/s (typical) | |
| Environmental Conditions | Operating temperature 15° C to 35° C ambient Relative humidity <70% (non-condensing) Storage temperature -25° C to 45° C |
|
| Power requirements AC/DC power supply (provided) |
90-264 VAC, 47–63 Hz | |
* Specifications, form factor, and spectrometer cover subject to change without notice.
No LabVIEW™ license is needed to run our acquisition software.
+ This value includes optical and electronic crosstalk
Mechanical Drawings
