product Image
ITT Cannon CLC Series Clip Lock Circular Vector Connectors
Model Name
-
Series
Connectors
Data
-
Manufacturer information
provider logo
ITT CANNON

Manufacturer of Highly Engineered Connector Solutions

Problem with product info?
Update request
Manufacturer
ITT CANNON
Brand
-
SKU
141478
Product Name
ITT Cannon CLC Series Clip Lock Circular Vector Connectors
Model Name
-
Size
-
Weight
-
Product Details

SEALED CLIP LOCK CIRCULAR CONNECTORS

ITT Cannon CLC series clip lock circular vector connectors utilize a 1mm contact system for the smallest sensor connector with dependable integrity. The CLC series is an environmentally-resistant, harsh environment connector designed for under-the-hood automotive and off-road vehicle applications where a small-size, positive-locking, sealed connection is required, for instance in sensors, valves, automotive harnesses, marine, off-road vehicles and CAN buss applications.

ITT Cannon clip lock circular connectors are user-friendly and easy to install and service, with audible and tactile feedback. The CLC series is available as a 2 pin connector and a 4 pin connector.

For full product details on the ITT Cannon CLC series clip lock circular connectors, see the specifications below.

 

 

Features

  • Clip Lock
    Mating connectors are securely locked together by a stainless steel clip. Connector halves simply slide together until the clip snaps into place. To unmate the connectors, just depress the clip and slide the connectors apart.
  • Extremely Small Size
    CLC series connectors are one of the smallest connector packages available, able to be installed in tight places where larger, bulkier connectors cannot be used.
  • Terminal Position Assurance (TPA) (Optional)
    The TPA system was designed with the automotive market in mind. Crimped-on contacts are inserted and extracted from the rear of the connector by hand without having to use insertion or extraction tools. Just insert the contact into the connector body until it snaps into place, then depress the bright orange TPA lock and your contacts are locked into place and cannot be removed until the TPA lock is lifted. This allows the contact to be eased out the rear of the connector for repair or replacement. Please note that the TPA lock will not permit a contact to be partially inserted.
  • Strong Resistance to Environmental Contaminants
    High performance thermoplastic bodies, silicone wire seals, and stainless steel clips withstand the rigors of under-the-hood contaminants including oils, fuels, greases, and salt spray.
  • Cost-Effective Design
    Several factors make this connector very cost efficient, including high volume reeled contacts for use with stripper crimper machines, low per unit cost, no special insertion/extraction tools needed and their ability to be robotically assembled.

 

 

Materials & Finishes

Connector Housing
High-performance thermoplastic body, silicone wire seals with stainless steel locking clip
 
Contacts
Copper alloy
 
Platings
Selective gold over nickel plating on mating surface, tin/lead over nickel plating on wire crimp area

 

 

 

Electrical Data

Dielectric Withstanding Voltage
1000 Vac rms at sea level
 
Current Rating
5 Amps continuous at 150°C
 
Wire Range Sizes
20 - 16 AWG
 
Contact Resistance
10 milliohms maximum
 
Insulation Resistance
20 megohms minimum (USCAR)

 

 

Mechanical

Operating Temperature
-40°C to 150°C (-40°F to 302°F)
 
Sealing
2 - 12 inches of 5% salt solution for 24 hours
 
Wire Sealing Range
.078” - .130” (1.98mm - 3.30mm)
 
Insulation Strip Length
.210” - .220” (5.33mm - 5.59mm)
 
Mating Life
25 cycles minimum
 
Salt Spray
5% solution 96 hours
 
Heat
150°C +/- 3° 1000 hours
 
Chemical Resistance
Resistant to most common automotive contaminants
 
Vibration
10.2 grms 20 hours radial and longitudinal axis
 
Shock
100 g’s 12 shocks for 6 milliseconds
 
Contact Type
Crimp using automatic, semi-automatic or hand tooling
 
Number of Circuits
2 & 4
 
Contact Insertion
From rear, no insertion tool needed
 
Contact Retention
25 lbs. (111N) minimum
 
Polarization
Molded key and keyway
ITT CANNON
Manufacturer of Highly Engineered Connector Solutions
ITT Cannon은 커넥터 및 상호연결 솔루션의 설계와 제조 분야를 선도하는 기업입니다.랙 앤 패널 및 D-sub 커넥터의 발명부터 최신 소형화된 제품에 이르기까지 ITT Cannon은 전 세계 고객에게 혁신적인 상호 연결 솔루션을 제공합니다. 글로벌 제조 시설에서 상업 항공, 방위, 에너지, 산업, 의료, 석유 및 가스, 운송, 우주를 포함한 광범위한 시장에 서비스를 제공합니다.
Inquiry