Industrial automatic control machine manufacturer, Control switch, Limit switch, Hoist switch and more
Features
1. Using high-intensity 7 segment LED with good visibility
2. Designed Circular, Flush Type Sleek And Slime size
3. Attaching to ∅22, 30, 66 by using integral nut connection method for fast installation
4. Apply a back light function to check the display in the dark (∅66)
Performance
| List | Ampere Indicator Series |
| Rating | AC110V / 220V (50~60Hz) / DC 12~24V |
| Input signal | AC MAX 50A / DC MAX 10A |
| A/D conversion method | Integral method |
| Sampling period | 200ms |
| Response speed | 800ms |
| External control | Indicated value by contact input |
| Measurement & Display | Effective value display by full-wave rectifier |
| Display | 7 segment LED |
| Ambient temperature | -10℃ ~ 50℃ |
| Ambient humidity | 45 ~ 85% RH |
| Vibration resistance | 10~50Hz double amplitude X, Y, Z for 2hours |
| Shock Withstand | 300㎨, each 3 times for X, Y, Z 6directions |
| Accuracy | AC: ±0.5% of F.S / DC : ±0.2% of F.S |
| Resolving power | AC MAX 50.0(100mA) / DC MAX 9.9A(10mA) |
| Insulation resistance | Min. 100㏁ at 500V d.c |
| Dielectric strength | 1,500V a.c for 1min |
| Power consumption | AC : 4W / DC : 2W |
| Protection degree | IP65 for front side |
Name Composition
Appearance & Name / Drawing
∅66 Plastic guide Silver & Black
N-Type 2 : ∅22 (Normal type) Plastic guide
H-Type : ∅22 (High-grade type) Aluminum guide
L-Type : ∅30 (Luxury buried type) Aluminum guide
Appearance & Name / Drawing
Connection diagram 
Ateention
1. Connect wires after verifying the operational voltage and allowed current.
2. During Connection, set the screw fastening torque at below 5kgf.
3. If the measurement value exceeds the measuring range, the Find will be shown "---"
4. The measuring instruments such as this product are weak to noise.
If abnormal voltage(more than 1kV) occurs caused by a Power Relay, Magnet Switch, High-frequency equipment,
Reverse Electromotive Force, High-votage spark, and Lightning, use the line filter or the noise absorbing circuit in the exterior line.
Noise prevention by line filter
| Noise prevention by varistor
|
5. Use the shield wire especially if the measuring input line is longer or a place with noise
Noise prevention by line filter
| Noise prevention by varistor
|
