Press machinery manufacturer, Mechanical press, Hydraulic press and more
KDHL Series / Semi-H Type Double Crank Link Motion Press
Capacity(Ton) 250 ~ 600
SEMI-H type press with a strong frame structure in front of C-frame cracks were complementary phenomena. Maintaining high accuracy.
- HIGHLY EFFICIENT WET TYPE CLUTCH BRAKE
- HYDRAULIC OVERLOAD PROTECTOR DEVICE
- SLIDE ADJUSTMENT DEVICE
- CIRCULATION TYPE AUTOMATIC OIL LUBRICATING SYSTEM
- MANUAL GREASE PUMP DEVICE
- 2POINT 8 PHASES STRUCTURE
- EXTEND DURABILITY OF MOLD
- PRODUCE WITH HIGH PRECISION AND HIGH QUALITY
- SUITABLE FOR PRECISE BLANKING, PIERCING, AND DRAWING
- BROAD WORKING SPACE
- STRUCTURE OF RIGID FRAME CAN GUARANTEE DYNAMIC ACCURACY
- SUITABILE FOR AUTOMATIZATION AND RATIONALIZATION
- PHOTOELECTRIC SAFETY DEVICE
- AIR EJECTOR
- FREE SET COUNTER
Standard Specifications
| Speciflcarion | Unit | KDHL-250 | KDHL-300 | KDHL-400 | KDHL-500 | KDHL-600 |
| Capacity | ton | 250 | 300 | 400 | 500 | 600 |
| Limit of Capacity | mm | 7 | 7 | 7 | 6 | 6 |
| Stroke | mm | 250 | 300 | 300 | 300 | 350 |
| Number of Stroke | spm | 35 | 30 | 30 | 30 | 30 |
| Die Height | mm | 550 | 600 | 700 | 700 | 700 |
| Adjustment of slide | mm | 120 | 120 | 120 | 150 | 150 |
| Area of slide | mm | 2100x700 | 2400x900 | 2700x1200 | 3000x1300 | 3000x1300 |
| Area of Bolster | mm | 2700x920 | 2700x1000 | 2800x1300 | 3000x1300 | 3000x1300 |
| Working height | mm | 1000 | 1000 | 1150 | 1300 | 1400 |
| Main Motor | kwxp | 22x4 | 30x4 | 37x4 | 45x4 | 55x4 |
| Die Cushion | ||||||
| Capacity | ton | 25 | 25 | 30 | 30 | 30 |
| Stroke | mm | 130 | 130 | 150 | 150 | 150 |
| Pad Area | mm | 1750x550 | 1800x560 | 1900x650 | 1900x650 | 1900x650 |
| Air Pressure | Kg/cm² | 5 | 5 | 5 | 5 | 5 |
Product Information
Features
- Equipped With Wet Type clutch and brake system
- Good Durability for long time continuous working
- Driving mechanism Link Motion offers good forming by low speed at bottom dead center
- Better workability for precision products
KSL 링크모션의 특징
1.가공능력
하사점 상 높은 위치에서의 허용능력은 높고 깊은 교축가공에 이용된다.
2.가공속도
링크의 기구를 이용해 가공부분의 속도가 느리게 작동이 된다.
3.제품의 성형성
교축 속도가 느리고 속도의 변동율이 적어 제품의 성형에 유리하다.
4.제품의 생산성
저속 가공, 빠른 상승속도에 생산 속도를 올릴수 있다. 자동화 작업시 상승속도에 따른 시간의 제약을 받는다.
5.기계의 진동
가공이 될때(타발 시) 속도가 느려지므로 블랭킹 등의 소음및 진동이 적은 편이다.
Selection
1. V/S MOTOR
2. DIE CUSHION
3. ANTI-VIBRATION UNIT
4. (Q.D.C) QUICK DIE CHANGE
5. ELECTRONIC GONIOMETER
6. KNOCK OUT DEVICE
7. AUTO TRANSFER DEVICE
8. PLC SYSTEM( Programable Logic Controller )
