KFF Series / H-Type Knuckle Joint Press
Capacity(Ton) 250 ~ 1000
Strong H-type frame structure.
Mounted the knuckle part on the driving part is for slow processing speed at the bottom dead center. It is advantageous for precise pressing process and perfect for cold/hot rolling, forging, precise piercing and fine blanking.
- HYDRAULIC OVERLOAD PROTECTOR DEVICE
- SLIDE ADJUSTMENT DEVICE
- CIRCULATION TYPE AUTOMATIC OIL LUBRICATING SYSTEM
- MANUAL GREASE PUMP DEVICE
- 8 PHASES STRUCTURE
- STRUCTURE OF RIGID FRAME CAN GUARANTEE DYNAMIC ACCURACY
- PHOTOELECTRIC SAFETY DEVICE
- AIR EJECTOR
- FREE SET COUNTER
- SUITABLE FOR VARIOUS PROCESSION SUCH AS COINING, EMBOSSING FINE BLANKING
Standard Specifications
| Speciflcarion | Unit | KKF-250 | KKF-400 | KKF-650 | KKF-800 | KKF-1000 |
| Capacity | ton | 250 | 400 | 650 | 800 | 1000 |
| Limit of Capacity | mm | 6 | 8 | 10 | 13 | 15 |
| Stroke | mm | 140 | 160 | 180 | 220 | 250 |
| Number of Stroke | spm | 50 | 45 | 40 | 35 | 30 |
| Die Height | mm | 550 | 650 | 750 | 800 | 900 |
| Adjustment of slide | mm | 50 | 50 | 50 | 50 | 50 |
| Area of slide | mm | 820x900 | 900x1000 | 1050x1150 | 1300x1200 | 1300x1200 |
| Area of Bolster | mm | 820x1000 | 900x1000 | 1050x1150 | 1300x1200 | 1300x1200 |
| Working height | mm | 850 | 850 | 850 | 850 | 850 |
| Main Motor | Kwxp | 22x4 | 45x4 | 75x4 | 90x4 | 110x4 |
Product Information
Features
- Good durability for long time continuous working
- Drive mechanism with knuckle joint offer good workability by low speed & dowel point at bottom dead center
- Better workability for compressive work press Forging Products such as, Coining, Embossing, Forging.
Selection
1. DC MOTOR
2. DIE CUSHION
3. ANTI-VIBRATION UNIT
4. (Q.D.C) QUICK DIE CHANGE
5. ELECTRONIC GONIOMETER
6. KNOCK OUT DEVICE
7. AUTO TRANSFER DEVICE
8. PLC SYSTEM( Programable Logic Controller )
