Control panel, Inverter, Synchronous motor, Remote control system, Display board and more
SICON-4000DZi is a leading-edge elevator control panel with hughly enhanced features by using advanced software programming technology and high speed dual DSP. Controller is comprised of inverter and mainboard as a simple unit.
It doesn't need to adjust manually slowing down length because of built in PPM calibration.It supports special company code for easy maintenance.
Specification
Power | 3-Phase 200v / 380v / 415v / 440v |
Frequency | 50/60Hz |
Nos. of stop | 64 Stops |
Speed | 45~240m/min |
Control Type | Rope type (Inverter) |
Speed Reduction | Encoder (500~8192Pluse) |
Display | Dot Matrix. / LCD |
Group | 8 Car |
Usage | Passenger / Freight |
Motor Type | PMSM, IM |
Inverter rated current
Kw Power | 5.5Kw | 7.5 | 11Kw | 15Kw | 22Kw | 30Kw | 37Kw | 45Kw | 55Kw |
200V | 27A | 37.3A | 49.5A | 73A | 93A | - | - | - | - |
380V | 17A | 17A | 24.7A | 34A | 47A | 64A | 78.7A | 93.2A | 116.2A |
Feature
- It can control up to 64 stops (for high raiser)
- It can control up to 240m/mim (for high speed)
(Reference site: Menara ING building in Kuala Lumpur Malaysia)
- Excellent Energy -Electric Power saving and Harmonic distortion reduction by applying ReGen Drive System.
- Built in Parameter for 2 Car parallel operation setting
ㆍUser can set by building’s operating conditions
ㆍImproved communication speed and stability by use of CAN communication
- It can control “Destination Dispatch Control System”
(A best suitable lift among the lifts in group operation is dispatched when passenger registers the destination floor at the landing floor)
- Applied high speed dual DSP 32bit
ㆍ Various functions (various monitoring functions, failure detection record functions, etc)
- It can operate by A/B encoder’s signal only when using PMS Motor
ㆍBuilt-in magnetic detection algorithm for PMS Motor by A/B encoder’s signal
ㆍ Operating by parameter settings without lock-in procedure
- There are two types operator, so user can choose one
ㆍ Fixing type by supporter on the Main PCB (LCD + 9 keys)(non-detachable)
ㆍUsing OPP-4000 unit (handheld type)
- Built in PPM Calibration function for Auto deceleration distance calculation
ㆍ It is easy to install at jobsite
ㆍNo need to adjust deceleration distance manually after change parameter
- Built in Safety line grounding detection function
- Applied Sin / Cos encoder as well as UVW encoder