Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍ1Ph./3Ph. Motor
ㆍCONTINUOUS DUTY
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Rating | Starting | Condenser | ||||
---|---|---|---|---|---|---|---|---|---|---|
Input (W) |
Current (A) |
Torque (kgf·cm) |
Speed (rpm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||
IH8PF25-10 | 25 | 1ø100 | 50 | 70 | 0.75 | 1.95 | 1250 | 1.30 | 250 | 6.0 |
60 | 65 | 0.75 | 1.57 | 1550 | 1.30 | |||||
IH8PF25-11 | 1ø110 | 60 | 75 | 0.75 | 1.57 | 1550 | 1.50 | 250 | 6.0 | |
IH8PF25-20 | 25 | 1ø200 | 50 | 60 | 0.32 | 1.87 | 1300 | 1.30 | 450 | 1.5 |
60 | 60 | 0.32 | 1.52 | 1600 | 1.30 | |||||
IH8PF25-22 | 1ø220 | 60 | 65 | 0.32 | 1.52 | 1600 | 1.50 | 450 | 1.5 | |
IH8PF25-1U | 25 | 1ø115 | 60 | 75 | 0.70 | 1.57 | 1550 | 1.50 | 250 | 5.0 |
IH8PF25-2C | 22 | 1ø220 | 50 | 55 | 0.28 | 1.71 | 1250 | 1.0 | 450 | 1.3 |
25 | 1ø240 | 50 | 65 | 0.28 | 1.95 | 1250 | 1.40 | |||
IH8PF25-32 | 25 | 3ø220 | 50 | 60 | 0.30 | 1.87 | 1300 | 6.00 | ||
60 | 60 | 0.30 | 1.52 | 1600 | 5.00 | |||||
IH8PF25-33 | 25 | 3ø380 | 50 | 60 | 0.17 | 1.87 | 1300 | 6.00 | ||
60 | 60 | 0.17 | 1.52 | 1600 | 5.00 | |||||
IH8PF25-34 | 25 | 3ø440 | 50 | 60 | 0.15 | 1.87 | 1300 | 6.00 | ||
60 | 60 | 0.15 | 1.52 | 1600 | 5.00 |
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
※ The inverter is not available on three phase 380V~440V motors.
- Insulation of windings may deteriorate and damage the motor
■ RATED TORQUE OF GEARED MOTOR
Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
IH8PF25 + 8H□FM | 4.7 | 7.9 | 12 | 20 | 24 | 35 | 43 | 64 | 96 | 100 | 100 | |
IH8PF25 + 8H□FB | 4.6 | 7.6 | 11 | 19 | 23 | 34 | 41 | 62 | 93 | 100 | 100 | |
(unit : kg·cm) |
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will
- be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) IH8S25WT 1.6kg
■ GEARED MOTOR IH8PF25 + 8H□ FM(8H□ FB) WT 1.6+0.5/0.6kg
■ BOLT SIZE
No | L(mm) | GEAR RATIO | BOLT SIZE |
---|---|---|---|
01 | 32 | 1/3 ~ 1/20 | M5×60 |
02 | 42 | 1/25 ~ 1/200 | M5×70 |
■ KEY SPEC
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.