Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍMost Powerful
ㆍDUTY 30 Min.
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Rating | Starting | Condenser | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Input (W) |
Current (A) |
Torque (kgf·cm) |
Speed (rpm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||
| RH9PG60-10 | 60 | 1ø100 | 50 | 150 | 1.60 | 4.49 | 1300 | 5.00 | 250 | 25.0 |
| 60 | 155 | 1.60 | 3.65 | 1600 | 5.00 | |||||
| RH9PG60-11 | 1ø110 | 60 | 180 | 1.60 | 3.65 | 1600 | 6.00 | 250 | 25.0 | |
| RH9PG60-20 | 60 | 1ø200 | 50 | 160 | 0.85 | 4.49 | 1300 | 6.00 | 450 | 6.0 |
| 60 | 160 | 0.85 | 3.65 | 1600 | 6.00 | |||||
| RH9PG60-22 | 1ø220 | 60 | 170 | 0.85 | 3.65 | 1600 | 7.00 | 450 | 6.0 | |
| RH9PG60-1U | 60 | 1ø115 | 60 | 170 | 1.50 | 3.65 | 1600 | 5.50 | 250 | 20.0 |
| RH9PG60-2C | 60 | 1ø220 | 50 | 150 | 0.76 | 4.87 | 1200 | 5.70 | 450 | 5.0 |
| 70 | 1ø240 | 50 | 170 | 0.76 | 5.68 | 1200 | 7.00 | |||
- For motor with straight shaft, please write S in place of PG in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation
- Reversing direction without stopping completely may result in damage to the motor and reduce the life of the motor due to excessive inertia.
- The starting torque is higher than that of the INDUCTION MOTOR.
■ RATED TORQUE OF GEARED MOTOR
| Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
| RH9PG60 + 9H□GB | 11 | 18 | 27 | 41 | 49 | 74 | 88 | 147 | 200 | 200 | 200 | |
| 11 | 18 | 27 | 40 | 48 | 72 | 86 | 144 | 200 | 200 | 200 | ||
| (unit : kg·cm) | ||||||||||||
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) RH9S60 WT 2.6kg
■ GEARED MOTOR RH9PG60 + 9H□ GB WT 2.6+1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GB | M6×90 |
■ KEY SPEC
■ GEARED HEAD9H□ GBFWT 1.5kg
■ BOLT SIZE
| TYPE | BOLT SIZE |
|---|---|
| 9H□ GBF | M6×25 |
■ KEY SPEC
■ DECIMAL GEAR HEAD 9H10XG WT 0.6kg
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.