Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍSpeed Control
ㆍTacho-Generator Type
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| IHT7PF15-10 | 15 | 1ø100 | 50 | 90~1400 | 1.03 | 0.26 | 0.40 | 0.80 | 250 | 5.0 |
| 60 | 90~1700 | 1.03 | 0.26 | 0.40 | 0.80 | |||||
| IHT7PF15-11 | 1ø110 | 60 | 90~1700 | 1.22 | 0.30 | 0.40 | 0.90 | 250 | 5.0 | |
| IHT7PF15-20 | 15 | 1ø200 | 50 | 90~1400 | 1.03 | 0.26 | 0.20 | 0.80 | 450 | 1.2 |
| 60 | 90~1700 | 1.03 | 0.26 | 0.20 | 0.80 | |||||
| IHT7PF15-22 | 1ø220 | 60 | 90~1700 | 1.22 | 0.30 | 0.20 | 0.90 | 450 | 1.2 | |
| IHT7PF15-1U | 15 | 1ø115 | 60 | 90~1700 | 1.22 | 0.30 | 0.45 | 0.90 | 250 | 4.0 |
| IHT7PF15-2C | 13 | 1ø220 | 50 | 90~1400 | 1.05 | 0.26 | 0.21 | 0.80 | 450 | 1.0 |
| 15 | 1ø240 | 50 | 90~1400 | 1.22 | 0.30 | 0.21 | 0.90 | |||
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Speed Range (rpm) |
Rated Torque | Rated Current (A) |
Starting | Condenser | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 1200rpm (kgf·cm) |
90rpm (kgf·cm) |
Torque (kgf·cm) |
(V) | (㎌) | ||||||
| RHT7PF15-10 | 15 | 1ø100 | 50 | 90~1400 | 1.03 | 0.26 | 0.50 | 1.00 | 250 | 6.0 |
| 60 | 90~1700 | 1.03 | 0.26 | 0.50 | 1.00 | |||||
| RHT7PF15-11 | 1ø110 | 60 | 90~1700 | 1.22 | 0.30 | 0.50 | 1.20 | 250 | 6.0 | |
| RHT7PF15-20 | 15 | 1ø200 | 50 | 90~1400 | 1.03 | 0.26 | 0.25 | 1.00 | 450 | 1.5 |
| 60 | 90~1700 | 1.03 | 0.26 | 0.25 | 1.00 | |||||
| RHT7PF15-22 | 1ø220 | 60 | 90~1700 | 1.22 | 0.30 | 0.25 | 1.20 | 450 | 1.5 | |
| RHT7PF15-1U | 15 | 1ø115 | 60 | 90~1700 | 1.22 | 0.30 | 0.50 | 1.10 | 250 | 4.5 |
| RHT7PF15-2C | 13 | 1ø220 | 50 | 90~1400 | 1.05 | 0.26 | 0.22 | 1.00 | 450 | 1.2 |
| 15 | 1ø240 | 50 | 90~1400 | 1.22 | 0.30 | 0.22 | 1.10 | |||
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation.
- It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40℃
- when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.
■ MOTOR(STRAIGHT SHAFT) I(R)HT7S15 WT 1.2kg
■ GEARED MOTOR I(R)HT7PF15 + 7H□ FM(7H□ FB)WT 1.2+0.5/0.6kg
■ BOLT SIZE
| No | L(mm) | GEAR RATIO | BOLT SIZE |
|---|---|---|---|
| 01 | 31 | 1/3 ~ 1/18 | M5×60 |
| 02 | 41 | 1/20 ~ 1/200 | M5×70 |
■ KEY SPEC
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.