Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍDUTY 30 Min.
■ PERFORMANCE DATA (DUTY : 30 Min.)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Rating | Starting | Brake | Condenser | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Current (A) |
Torque (kgf·cm) |
Speed (rpm) |
Torque (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||
| RHK7PF15-10 | 15 | 1ø100 | 50 | 0.50 | 1.17 | 1250 | 1.00 | 6 | 2.0 | 250 | 6.0 |
| 60 | 0.50 | 0.94 | 1550 | 1.00 | |||||||
| RHK7PF15-11 | 1ø110 | 60 | 0.50 | 0.94 | 1550 | 1.20 | 6 | 2.0 | 250 | 6.0 | |
| RHK7PF15-20 | 15 | 1ø200 | 50 | 0.25 | 1.17 | 1250 | 1.00 | 6 | 2.0 | 450 | 1.5 |
| 60 | 0.25 | 0.94 | 1550 | 1.00 | |||||||
| RHK7PF15-22 | 1ø220 | 60 | 0.25 | 0.94 | 1550 | 1.20 | 6 | 2.0 | 450 | 1.5 | |
| RHK7PF15-1U | 15 | 1ø115 | 60 | 0.50 | 0.97 | 1500 | 1.10 | 6 | 2.0 | 250 | 4.5 |
| RHK7PF15-2C | 13 | 1ø220 | 50 | 0.22 | 1.05 | 1200 | 1.00 | 6 | 2.0 | 450 | 1.2 |
| 15 | 1ø240 | 50 | 0.22 | 1.22 | 1200 | 1.10 | |||||
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation
- Reversing direction without stopping completely may result in damage to the motor and reduce the life of the motor due to excessive inertia.
- The starting torque is higher than that of the INDUCTION MOTOR.
■ RATED TORQUE OF GEARED MOTOR
| Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
| RHK7PF15 + 7H□FM | 2.8 | 4.7 | 7.1 | 11.8 | 14.2 | 21.3 | 25.6 | 38 | 50 | 50 | 50 | |
| RHK7PF15 + 7H□FB | 2.7 | 4.6 | 6.9 | 11.4 | 13.7 | 20.6 | 24.7 | 37 | 50 | 50 | 50 | |
| (unit : kg·cm) | ||||||||||||
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) RHK7S15 WT 1.4kg
■ GEARED MOTOR RHK7PF15 + 7H□ FM(7H□ FB) WT 1.4+0.5/0.6kg
■ BOLT SIZE
| No | L(mm) | GEAR RATIO | BOLT SIZE |
|---|---|---|---|
| 01 | 31 | 1/3 ~ 1/18 | M5×60 |
| 02 | 41 | 1/20 ~ 1/200 | M5×70 |
■ KEY SPEC
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.