Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍCONTINUOUS DUTY
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
| Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Rating | Starting | Brake | Condenser | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Current (A) |
Torque (kgf·cm) |
Speed (rpm) |
Torque (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||
| IHK8PF25-32 | 25 | 3ø220 | 50 | 0.30 | 1.87 | 1300 | 6.00 | 6 | 2.0 | ||
| 60 | 0.30 | 1.52 | 1600 | 5.00 | |||||||
| IHK8PF25-33 | 25 | 3ø380 | 50 | 0.17 | 1.87 | 1300 | 6.00 | 6 | 2.0 | ||
| 60 | 0.17 | 1.52 | 1600 | 5.00 | |||||||
| IHK8PF25-34 | 25 | 3ø440 | 50 | 0.15 | 1.87 | 1300 | 6.00 | 6 | 2.0 | ||
| 60 | 0.15 | 1.52 | 1600 | 5.00 | |||||||
- For motor with straight shaft, please write S in place of PF in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation
- Reversing direction without stopping completely may result in damage to the motor and reduce the life of the motor due to excessive inertia.
- The starting torque is higher than that of the INDUCTION MOTOR.
※ The inverter is not available on three phase 380V~440V motors.
- Insulation of windings may deteriorate and damage the motor
■ RATED TORQUE OF GEARED MOTOR
| Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
| IHK8PF25 + 8H□FM | 4.6 | 7.6 | 11 | 19 | 23 | 34 | 41 | 61 | 92 | 100 | 100 | |
| IHK8PF25 + 8H□FB | 4.4 | 7.4 | 11 | 18 | 22 | 33 | 40 | 60 | 90 | 100 | 100 | |
| (unit : kg·cm) | ||||||||||||
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) IHK8S25 WT 1.7kg
■ GEARED MOTOR IHK8PF25 + 8H□ FM(8H□ FB) WT 1.7+0.5/0.6kg
■ BOLT SIZE
| No | L(mm) | GEAR RATIO | BOLT SIZE |
|---|---|---|---|
| 01 | 32 | 1/3 ~ 1/20 | M5×60 |
| 02 | 42 | 1/25 ~ 1/200 | M5×70 |
■ KEY SPEC
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.