Small precision motor manufacturer, Induction motor, Speed control, Geared motor
ㆍOFF BRAKE TYPE
ㆍCONTINUOUS DUTY
■ PERFORMANCE DATA (DUTY : CONTINUOUS)
Motor Type | Output (W) |
Voltage (V) |
Freq. (Hz) |
Rating | Starting | Brake | Condenser | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
Current (A) |
Torque (kgf·cm) |
Speed (rpm) |
Torque (kgf·cm) |
Input (W) |
Torque (kgf·cm) |
(V) | (㎌) | ||||
IHK9PG120-32 | 120 | 3ø220 | 50 | 1.00 | 8.99 | 1300 | 17.00 | 10 | 10.0 | ||
60 | 1.00 | 7.30 | 1600 | 19.00 | |||||||
IHK9PG120-33 | 120 | 3ø380 | 50 | 0.60 | 8.99 | 1300 | 17.00 | 10 | 10.0 | ||
60 | 0.60 | 7.30 | 1600 | 19.00 | |||||||
IHK9PG120-34 | 120 | 3ø440 | 50 | 0.50 | 8.99 | 1300 | 17.00 | 10 | 10.0 | ||
60 | 0.50 | 7.30 | 1600 | 19.00 |
- For motor with straight shaft, please write S in place of PG in Motor Type.
- Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation
- Reversing direction without stopping completely may result in damage to the motor and reduce the life of the motor due to excessive inertia.
- The starting torque is higher than that of the INDUCTION MOTOR.
※ The inverter is not available on three phase 380V~440V motors.
- Insulation of windings may deteriorate and damage the motor
■ RATED TORQUE OF GEARED MOTOR
Speed of Geared Motor | rpm | 500 | 300 | 200 | 120 | 100 | 60 | 50 | 30 | 20 | 15 | 10 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Ratio | 50Hz | 3 | 5 | 7.5 | 12.5 | 15 | 25 | 30 | 50 | 75 | 100 | 150 |
60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | |
IHK9PG120 + 9H□GB | 22 | 36 | 55 | 82 | 98 | 174 | 177 | 200 | 200 | 200 | 200 | |
21 | 35 | 53 | 80 | 96 | 144 | 172 | 200 | 200 | 200 | 200 | ||
(unit : kg·cm) |
- The rotation of geared motor in green screen is reverse of motor rotation.
- Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure.
- When ordering gear head, please fill blank □ with gear ratio
■ MOTOR(STRAIGHT SHAFT) IHK9S120 WT 3.5kg
■ GEARED MOTOR IHK9PG120 + 9H□ GB WT 3.5+1.5kg
■ BOLT SIZE
TYPE | BOLT SIZE |
---|---|
9H□ GB | M6×90 |
■ KEY SPEC
■ GEARED HEAD 9H□ GBF WT 1.5kg
■ BOLT SIZE
TYPE | BOLT SIZE |
---|---|
9H□ GBF | M6×25 |
■ KEY SPEC
■ DECIMAL GEAR HEAD 9H10XG WT 0.6kg
■ WIRING DIAGRAM
- The direction of rotation is seen from the end of motor shaft.
- Change the rotation direction of the motor only after the motor stops completely.